-
Email
-
Call
+91 98590 17777
316 stainless steel tube
What is 1.4401 tube?
1.4401 popularly known as SS grade 316 is austenitic and has different commercial applications. The 1.4401 has similar mechanical properties like grade 304 but has higher strength in elevated temperature conditions.
The ASTM A213 TP316 material has a mid-range level of carbon, and its alloy also contains 2-3% molybdenum. Due to the chemical composition, the SA 213 TP316 tubes show increased resistance to corrosion, high temperatures upto 450 ° C, and acidic elements. Due to its low carbon content, the 316 Stainless Steel Tube is less susceptible to pitting and intergranular corrosion.
SA 213 TP316 tubing and Seamless 316 stainless steel tubing supplier in India
3 top reasons to buy from 316 stainless steel tube manufacturer instead of a supplier
Buying from a SS 316 Seamless Tube manufacturer in India rather than a supplier comes with several benefits:
- Contacting Seamless 316 Stainless Steel Tubing manufacturers directly means you are eliminating any third party from the deal, which will save time and cost.
- They have more expertise and hence can recommend the best tubing solution for your specific application than 316 SS Tubing suppliers.
- Finally, you can get easy customization of your 316 Stainless Steel Tubing solutions and expect timely deliveries.
Searching for SS 316 seamless tube a Manufacturer in Gujarat? We deliver 316 stainless steel square tube to your exact requirements
316 Stainless Steel Tube
ASTM A213 TP316 Tube
SA 213 TP316 Tubing
An easy way to recognize for buyer if the tubing material stainless steel is 316 or not?
An easy way of determining whether the given tube is SS 316 Welded Tubes or not is through the Inox test. After the test, if a yellow stain is noticed on the surface, a chemical reagent is applied.
If this changes the color of the stain from yellow to pink, then it is determined that the tubes is 316 Stainless Steel Square Tube. It happens due to the presence of molybdenum in the alloy.
You can also carry out the magnet test on AISI 316 Tube; good quality material will have low to zero magnetic attraction.
316 stainless steel tubing and SS 316 welded tube in sizes ranging from 6.35 mm To 101.6 mm OD
Table of Contents
- SS 316 tube specification
- Types of SA 213 TP316 tubing
- Stainless steel 316 tube weight chart
- SA 213 TP316 seamless tubing chemical composition
- 316 stainless steel tube mechanical properties
- Stainless steel 316 tube sizes
- ASTM A213 TP316 tubes equivalent
- Physical properties of SS 316 welded tube
- 316 stainless steel tube pressure rating
- 316 stainless steel tubing dimensions
- 316 stainless steel square tubing sizes chart
- 1.4401 tube application
- Seamless 316 stainless steel tubing tolerance
SS 316 tube specification
| Sizes | Applications | UNS NO |
|---|---|---|
| OD: 16-119mm |
|
S31600 |
| Technique | Test certificate | WNR No |
| Extrusion, Cold drawn, Cold rolled, Hot rolled Tubes | EN 10204 3.1 B | 1.4401 |
| Wall Thickness | Standards | 316 SS tubing temperature rating |
| 0.25mm-3.0mm |
|
2,500 °F – 2,550 °F (1,371 °C – 1,399 °C) |
Supply ASTM A213 TP316 tube and 316 stainless steel round tube with hydro-tested, MTC & charpy test certificate
Types of SA 213 TP316 tubing
SA 213 TP 316 Tube
316 Stainless Steel Tubing
316 Stainless Tubing
316 SS Tubing
SS 316 Seamless Tube
SS 316 Welded Tube
316 Stainless Steel Square Tube
ASTM A554 TP316 Square Tube
SS 316 Electropolished Tubing
316 Stainless Steel Square Tubing
SS316 Tube
316 Stainless Steel Rectangular Tube
316 Seamless Tubing
316 Stainless Steel Round Tube
AISI 316 Tubes
316 Polished Stainless Tubing
Seamless 316 Stainless Steel Tubing
1.4401 Tubes
SS 316 Electropolish Tubing
Polished 316 Stainless Steel Tubing
Stainless Steel 316 Tube
Stainless steel 316 tube and SS 316 electropolished tubing can be used in temperature range up to 1400° F (760° C)
Stainless steel 316 tube weight chart
| Outer Dia | Weight per | Wall | Weight per | Outer Dia | Wall |
|---|---|---|---|---|---|
| (Inch) | metre (kilogram) | (milimeter) | metre (kilogram) | (Inch) | (milimeter) |
| 1/2 | 0.42 | 1.50 | 2.64 | 1 1/2 | 3.00 |
| 5/8 | 0.44 | 1.20 | 2.99 | 50mm | 2.50 |
| 5/8 | 0.54 | 1.50 | 3.55 | 50mm | 3.00 |
| 3/4 | 0.53 | 1.20 | 1.49 | 2 | 1.20 |
| 3/4 | 0.66 | 1.50 | 1.85 | 2 | 1.50 |
| 7/8 | 0.63 | 1.20 | 2.40 | 2 | 2.00 |
| 7/8 | 1.01 | 2.00 | 7.43 | 2 | 3.00 |
| 1 | 0.73 | 1.20 | 2.34 | 2 1/2 | 1.50 |
| 1 | 0.90 | 1.50 | 2.81 | 3 | 1.50 |
| 1 | 1.17 | 2.00 | 5.52 | 3 | 3.00 |
| 1 1/4 | 1.13 | 1.50 | 7.42 | 4 | 3.00 |
| 1 1/2 | 1.38 | 1.50 |
SA 213 TP316 seamless tubing chemical composition
| GRADE | MN | C | SI | S | P | CR | NI | MO | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 316 | Min | - | - | - | - | 0 | 16.0 | 10.0 | 2.00 | - |
| Max | 2.0 | 0.08 | 0.75 | 0.03 | 0.045 | 18.0 | 14.0 | 3.00 | 0.10 |
316 stainless steel tube mechanical properties
| GRADES | ELONG (% IN 50MM) MIN |
TENSILE STRENGTH (MPA) MINIMUM |
YIELD STR 0.2% PROOF (MPA) MINIMUM |
HARDNESS | |
|---|---|---|---|---|---|
| ROCKWELL B (HR B) MAXIMUM | BRINELL (HB) MAXIMUM | ||||
| 316 | 40 | 515 | 205 | 95 | 217 |
Stainless steel 316 tube sizes
| BWG | BWG | BWG | BWG | BWG | BWG | BWG | BWG | ||
| 16 | 14 | 25 | 22 | 20 | 18 | 12 | 10 | ||
| WT mm | WT mm | WT mm | WT mm | WT mm | WT mm |
WT mm | WT mm |
||
| Outside Dia | Outside Dia | 1.651 | 2.108 | 0.508 | 0.711 | 0.889 | 1.245 | 2.769 | 3.404 |
| Milimeter | inches | kgs/m | kgs/m | kgs/m | kgs/m | kgs/m | kgs/m | kgs/m | |
| 31.75 | 1 1/4 | 1.244 | 1.574 | 0.554 | 0.688 | 0.947 | 2.014 | 2.641 | |
| 38.1 | 1 1/2 | 1.514 | 1.904 | 0.667 | 0.832 | 1.144 | 2.454 | 3.233 | |
| 44.5 | 1 3/4 | 1.774 | 2.244 | 1.342 | 2.894 | 3.5 | |||
| 50.8 | 2 | 2.034 | 2.574 | 1.549 | 3.334 | 4.03 | |||
| 63.5 | 2 1/2 | 2.554 | 3.244 | 1.949 | 4.214 | 5.13 | |||
| 76.2 | 3 | 3.084 | 3.914 | 2.345 | 5.094 | 6.19 | |||
| 6.35 | 1/4 | 0.212 | 0.081 | 0.109 | 0.133 | 0.174 | |||
| 9.53 | 3/8 | 0.356 | 0.429 | 0.126 | 0.157 | 0.193 | 0.257 | ||
| 12.7 | 1/2 | 0.457 | 0.612 | 0.214 | 0.263 | 0.356 | 0.754 | ||
| 15.88 | 5/8 | 0.588 | 0.796 | 0.271 | 0.334 | 0.455 | 0.995 | ||
| 19.05 | 3/4 | 0.729 | 0.895 | 0.327 | 0.405 | 0.553 | 1.236 | ||
| 25.4 | 1 | 0.981 | 1.234 | 0.44 | 0.546 | 0.75 | 1.574 | 2.05 | |
| 88.9 | 3 1/2 | 3.609 | 4.584 | 2.729 | 5.974 | 7.27 | |||
| 101.6 | 4 | 4.134 | 5.254 | 6.854 | 8.35 | ||||
| 114.3 | 4 1/2 | 4.654 | 5.924 | 7.734 | 9.43 |
ASTM A213 TP316 tubes equivalent
| GRADE | UNS NO |
EURONORM | OLD BRITISH | SWEDISH SS |
JAPANESE JIS |
||
|---|---|---|---|---|---|---|---|
| NO | NAME | BS | EN | ||||
| 316 | S31600 | 1.4401 | X5CrNiMo17-12-2 | 316S31 | 58H, 58J | 2347 | SUS 316 |
Physical properties of SS 316 welded tube
| GRADE | DENSITY (KG/M3) |
MEAN CO-EFF OF THERMAL EXPANSION (ΜM/M/°C) | ELASTIC MODULUS (GPA) |
SPECIFIC HEAT 0-100°C (J/KG.K) |
THERMAL CONDUCTIVITY (W/M.K) |
ELEC RESISTIVITY (NΩ.M) |
|||
|---|---|---|---|---|---|---|---|---|---|
| 0-100°C | 0-315°C | 0-538°C | AT 100°C | AT 500°C | |||||
| 316 | 8000 | 15.9 | 16.2 | 17.5 | 193 | 500 | 16.3 | 21.5 | 74 |
316 stainless steel tube pressure rating
| Outer Diameter in Inch | Collapse Pressure *** (PSI) | Theoretical Yield Point ** (PSI) | Wall Thickness in Inch | Yield Strength (PSI) | Theoretical Burst Pressure * (PSI) | Tensile Strength (PSI) | Working Pressure (PSI) 25% of Burst |
|---|---|---|---|---|---|---|---|
| 0.250 | 4,416 | 5,714 | 0.020 | 30,000 | 14,286 | 75,000 | 3,571 |
| 0.250 | 5,967 | 8,660 | 0.028 | 30,000 | 21,649 | 75,000 | 5,412 |
| 0.250 | 7,224 | 11,667 | 0.035 | 30,000 | 29,167 | 75,000 | 7,292 |
| 0.250 | 9,455 | 19,342 | 0.049 | 30,000 | 48,355 | 75,000 | 12,089 |
| 0.250 | 11,544 | 32,500 | 0.065 | 30,000 | 81,250 | 75,000 | 20,313 |
| 0.375 | 3,029 | 3,582 | 0.020 | 30,000 | 8,955 | 75,000 | 2,239 |
| 0.375 | 4,145 | 5,266 | 0.028 | 30,000 | 13,166 | 75,000 | 3,292 |
| 0.375 | 5,077 | 6,885 | 0.035 | 30,000 | 17,213 | 75,000 | 4,303 |
| 0.375 | 6,816 | 10,614 | 0.049 | 30,000 | 26,534 | 75,000 | 6,634 |
| 0.375 | 8,597 | 15,918 | 0.065 | 30,000 | 39,796 | 75,000 | 9,949 |
| 0.500 | 2,304 | 2,609 | 0.020 | 30,000 | 6,522 | 75,000 | 1,630 |
| 0.500 | 3,172 | 3,784 | 0.028 | 30,000 | 9,459 | 75,000 | 2,365 |
| 0.500 | 3,906 | 4,884 | 0.035 | 30,000 | 12,209 | 75,000 | 3,052 |
| 0.500 | 5,304 | 7,313 | 0.049 | 30,000 | 18,284 | 75,000 | 4,571 |
| 0.500 | 6,786 | 10,541 | 0.065 | 30,000 | 26,351 | 75,000 | 6,588 |
| 0.500 | 8,307 | 14,910 | 0.083 | 30,000 | 37,275 | 75,000 | 9,319 |
| 0.625 | 1,859 | 2,051 | 0.020 | 30,000 | 5,128 | 75,000 | 1,282 |
| 0.625 | 2,568 | 2,953 | 0.028 | 30,000 | 7,381 | 75,000 | 1,845 |
| 0.625 | 3,172 | 3,784 | 0.035 | 30,000 | 9,459 | 75,000 | 2,365 |
| 0.625 | 4,335 | 5,579 | 0.049 | 30,000 | 13,947 | 75,000 | 3,487 |
| 0.625 | 5,591 | 7,879 | 0.065 | 30,000 | 19,697 | 75,000 | 4,924 |
| 0.625 | 6,910 | 10,850 | 0.083 | 30,000 | 27,124 | 75,000 | 6,781 |
| 0.625 | 7,734 | 13,103 | 0.095 | 30,000 | 32,759 | 75,000 | 8,190 |
| 0.625 | 8,639 | 16,069 | 0.109 | 30,000 | 40,172 | 75,000 | 10,043 |
| 0.750 | 2,156 | 2,421 | 0.028 | 30,000 | 6,052 | 75,000 | 1,513 |
| 0.750 | 2,669 | 3,088 | 0.035 | 30,000 | 7,721 | 75,000 | 1,930 |
| 0.750 | 3,664 | 4,509 | 0.049 | 30,000 | 11,273 | 75,000 | 2,818 |
| 0.750 | 4,749 | 6,290 | 0.065 | 30,000 | 15,726 | 75,000 | 3,931 |
| 0.750 | 5,905 | 8,527 | 0.083 | 30,000 | 21,318 | 75,000 | 5,330 |
| 0.750 | 6,637 | 10,179 | 0.095 | 30,000 | 25,446 | 75,000 | 6,362 |
| 0.750 | 7,453 | 12,293 | 0.109 | 30,000 | 30,733 | 75,000 | 7,683 |
| 0.750 | 8,064 | 14,118 | 0.120 | 30,000 | 35,294 | 75,000 | 8,824 |
| 0.875 | 1,340 | 1,437 | 0.020 | 30,000 | 3,593 | 75,000 | 898 |
| 0.875 | 1,859 | 2,051 | 0.028 | 30,000 | 5,128 | 75,000 | 1,282 |
| 0.875 | 2,304 | 2,609 | 0.035 | 30,000 | 6,522 | 75,000 | 1,630 |
| 0.875 | 3,172 | 3,784 | 0.049 | 30,000 | 9,459 | 75,000 | 2,365 |
| 0.875 | 4,126 | 5,235 | 0.065 | 30,000 | 13,087 | 75,000 | 3,272 |
| 0.875 | 5,152 | 7,024 | 0.083 | 30,000 | 17,560 | 75,000 | 4,390 |
| 0.875 | 5,807 | 8,321 | 0.095 | 30,000 | 20,803 | 75,000 | 5,201 |
| 0.875 | 6,543 | 9,954 | 0.109 | 30,000 | 24,886 | 75,000 | 6,221 |
| 0.875 | 7,100 | 11,339 | 0.120 | 30,000 | 28,346 | 75,000 | 7,087 |
| 1.000 | 1,633 | 1,780 | 0.028 | 30,000 | 4,449 | 75,000 | 1,112 |
| 1.000 | 2,027 | 2,258 | 0.035 | 30,000 | 5,645 | 75,000 | 1,411 |
| 1.000 | 2,796 | 3,259 | 0.049 | 30,000 | 8,149 | 75,000 | 2,037 |
| 1.000 | 3,647 | 4,483 | 0.065 | 30,000 | 11,207 | 75,000 | 2,802 |
| 1.000 | 4,567 | 5,971 | 0.083 | 30,000 | 14,928 | 75,000 | 3,732 |
| 1.000 | 5,159 | 7,037 | 0.095 | 30,000 | 17,593 | 75,000 | 4,398 |
| 1.000 | 5,827 | 8,363 | 0.109 | 30,000 | 20,908 | 75,000 | 5,227 |
| 1.000 | 6,336 | 9,474 | 0.120 | 30,000 | 23,684 | 75,000 | 5,921 |
| 1.000 | 6,963 | 10,984 | 0.134 | 30,000 | 27,459 | 75,000 | 6,865 |
| 1.250 | 1,633 | 1,780 | 0.035 | 30,000 | 4,449 | 75,000 | 1,112 |
| 1.250 | 2,260 | 2,552 | 0.049 | 30,000 | 6,380 | 75,000 | 1,595 |
| 1.250 | 2,958 | 3,482 | 0.065 | 30,000 | 8,705 | 75,000 | 2,176 |
| 1.250 | 3,719 | 4,594 | 0.083 | 30,000 | 11,485 | 75,000 | 2,871 |
| 1.250 | 4,213 | 5,377 | 0.095 | 30,000 | 13,443 | 75,000 | 3,361 |
| 1.250 | 4,776 | 6,337 | 0.109 | 30,000 | 15,843 | 75,000 | 3,961 |
| 1.250 | 5,207 | 7,129 | 0.120 | 30,000 | 17,822 | 75,000 | 4,455 |
| 1.250 | 5,742 | 8,187 | 0.134 | 30,000 | 20,468 | 75,000 | 5,117 |
| 1.500 | 1,367 | 1,469 | 0.035 | 30,000 | 3,671 | 75,000 | 918 |
| 1.500 | 1,896 | 2,097 | 0.049 | 30,000 | 5,243 | 75,000 | 1,311 |
| 1.500 | 2,487 | 2,847 | 0.065 | 30,000 | 7,117 | 75,000 | 1,779 |
| 1.500 | 3,136 | 3,733 | 0.083 | 30,000 | 9,333 | 75,000 | 2,333 |
| 1.500 | 3,559 | 4,351 | 0.095 | 30,000 | 10,878 | 75,000 | 2,719 |
| 1.500 | 4,043 | 5,101 | 0.109 | 30,000 | 12,754 | 75,000 | 3,188 |
| 1.500 | 4,416 | 5,714 | 0.120 | 30,000 | 14,286 | 75,000 | 3,571 |
| 1.500 | 4,881 | 6,526 | 0.134 | 30,000 | 16,315 | 75,000 | 4,079 |
| 1.500 | 5,336 | 7,375 | 0.148 | 30,000 | 18,439 | 75,000 | 4,610 |
| 1.750 | 1,176 | 1,250 | 0.035 | 30,000 | 3,125 | 75,000 | 781 |
| 1.750 | 1,434 | 1,546 | 0.049 | 30,000 | 3,864 | 75,000 | 966 |
| 1.750 | 2,146 | 2,407 | 0.065 | 30,000 | 6,019 | 75,000 | 1,505 |
| 1.750 | 2,711 | 3,144 | 0.083 | 30,000 | 7,860 | 75,000 | 1,965 |
| 1.750 | 3,080 | 3,654 | 0.095 | 30,000 | 9,135 | 75,000 | 2,284 |
| 1.750 | 3,504 | 4,213 | 0.109 | 30,000 | 10,672 | 75,000 | 2,668 |
| 1.750 | 3,832 | 4,768 | 0.120 | 30,000 | 11,921 | 75,000 | 2,980 |
| 1.750 | 4,242 | 5,425 | 0.134 | 30,000 | 13,563 | 75,000 | 3,391 |
| 1.750 | 4,645 | 6,107 | 0.148 | 30,000 | 15,268 | 75,000 | 3,817 |
| 1.750 | 5,124 | 6,972 | 0.165 | 30,000 | 17,430 | 75,000 | 4,357 |
| 2.000 | 1,032 | 1,088 | 0.035 | 30,000 | 2,720 | 75,000 | 680 |
| 2.000 | 1,434 | 1,546 | 0.049 | 30,000 | 3,864 | 75,000 | 966 |
| 2.000 | 1,887 | 2,086 | 0.065 | 30,000 | 5,214 | 75,000 | 1,303 |
| 2.000 | 2,387 | 2,715 | 0.083 | 30,000 | 6,788 | 75,000 | 1,697 |
| 2.000 | 2,715 | 3,149 | 0.095 | 30,000 | 7,873 | 75,000 | 1,968 |
| 2.000 | 3,092 | 3,670 | 0.109 | 30,000 | 9,175 | 75,000 | 2,294 |
| 2.000 | 3,384 | 4,091 | 0.120 | 30,000 | 10,227 | 75,000 | 2,557 |
| 2.000 | 3,751 | 4,642 | 0.134 | 30,000 | 11,605 | 75,000 | 2,901 |
| 2.000 | 4,111 | 5,211 | 0.148 | 30,000 | 13,028 | 75,000 | 3,257 |
| 2.000 | 4,542 | 5,928 | 0.165 | 30,000 | 14,820 | 75,000 | 3,705 |
316 stainless steel tubing dimensions
| O.D. IN INCHES | WALL DECIMAL | WALL GAUGE | WEIGHT PER FT. IN LBS. | I.D. IN INCHES |
|---|---|---|---|---|
| 1/8 | .028 | 22 | .029 | .069 |
| 1/8 | .035 | 20 | .034 | .055 |
| 3/16 | .028 | 22 | .048 | .132 |
| 3/16 | .035 | 20 | .057 | .118 |
| 1/4 | .028 | 22 | .066 | .194 |
| 1/4 | .035 | 20 | .080 | .180 |
| 1/4 | .049 | 18 | .105 | .152 |
| 1/4 | .065 | 16 | .128 | .120 |
| 5/16 | .028 | 22 | .085 | .257 |
| 5/16 | .035 | 20 | .104 | .243 |
| 5/16 | .049 | 18 | .138 | .215 |
| 5/16 | .065 | 16 | .172 | .183 |
| 3/8 | .028 | 22 | .104 | .319 |
| 3/8 | .035 | 20 | .127 | .305 |
| 3/8 | .049 | 18 | .171 | .277 |
| 3/8 | .065 | 16 | .215 | .245 |
| 7/16 | .035 | 20 | .151 | .368 |
| 7/16 | .049 | 18 | .204 | .340 |
| 7/16 | .065 | 16 | .259 | .308 |
| 1/2 | .028 | 22 | .141 | .444 |
| 1/2 | .035 | 20 | .174 | .430 |
| 1/2 | .049 | 18 | .236 | .402 |
| 1/2 | .065 | 16 | .302 | .370 |
| 1/2 | .095 | 13 | .411 | .310 |
| 5/8 | .028 | 22 | .179 | .569 |
| 5/8 | .035 | 20 | .221 | .555 |
| 5/8 | .049 | 18 | .301 | .527 |
| 5/8 | .065 | 16 | .389 | .495 |
| 5/8 | .083 | 14 | .481 | .459 |
| 5/8 | .120 | 11 | .647 | .385 |
| 3/4 | .035 | 20 | .267 | .680 |
| 3/4 | .049 | 18 | .367 | .652 |
| 3/4 | .065 | 16 | .476 | .620 |
| 3/4 | .095 | 13 | .665 | .560 |
| 3/4 | .120 | 11 | .807 | .510 |
| 7/8 | .035 | 20 | .314 | .805 |
| 7/8 | .049 | 18 | .432 | .777 |
| 7/8 | .065 | 16 | .562 | .745 |
| 7/8 | .120 | 11 | .968 | .635 |
| 1 | .035 | 20 | .361 | .930 |
| 1 | .049 | 18 | .498 | .902 |
| 1 | .065 | 16 | .649 | .870 |
| 1 | .083 | 14 | .813 | .834 |
| 1 | .095 | 13 | .918 | .810 |
| 1 | .120 | 11 | 1.128 | .760 |
| 1 | .188 | 3/16 | 1.630 | .625 |
| 1 1/4 | .035 | 20 | .454 | 1.180 |
| 1 1/4 | .049 | 18 | .629 | 1.152 |
| 1 1/4 | .065 | 16 | .823 | 1.120 |
| 1 1/4 | .083 | 14 | 1.034 | 1.084 |
| 1 1/4 | .120 | 11 | 1.448 | 1.010 |
| 1 1/2 | .035 | 20 | .548 | 1.430 |
| 1 1/2 | .049 | 18 | .759 | 1.402 |
| 1 1/2 | .065 | 16 | .996 | 1.370 |
| 1 1/2 | .083 | 14 | 1.256 | 1.334 |
| 1 1/2 | .120 | 11 | 1.769 | 1.260 |
| 1 1/2 | .188 | 3/16 | 2.634 | 1.124 |
| 1 3/4 | .035 | 20 | .641 | 1.680 |
| 1 3/4 | .049 | 18 | .890 | 1.652 |
| 1 3/4 | .065 | 16 | 1.170 | 1.620 |
| 1 3/4 | .120 | 11 | 2.089 | 1.510 |
| 1 3/4 | .188 | 3/16 | 3.136 | 1.375 |
| 1 7/8 | .095 | 13 | 1.806 | 1.685 |
| 2 | .035 | 20 | .733 | 1.930 |
| 2 | .049 | 18 | 1.021 | 1.902 |
| 2 | .065 | 16 | 1.343 | 1.870 |
| 2 | .083 | 14 | 1.699 | 1.834 |
| 2 | .120 | 11 | 2.409 | 1.760 |
| 2 | .188 | 3/16 | 3.638 | 1.625 |
| 2 1/4 | .065 | 16 | 1.517 | 2.120 |
| 2 1/2 | .049 | 18 | 1.283 | 2.402 |
| 2 1/2 | .065 | .065 | 1.690 | 2.370 |
| 2 1/2 | .083 | 14 | 2.143 | 2.334 |
| 2 1/2 | .120 | 11 | 3.050 | 2.260 |
| 2 3/4 | .120 | 11 | 3.371 | 2.510 |
| 3 | .065 | 16 | 2.037 | 2.870 |
| 3 | .083 | 14 | 2.586 | 2.834 |
| 3 | .109 | .109 | 3.365 | 2.782 |
| 3 | .120 | 11 | 3.691 | 2.760 |
| 3 1/4 | .120 | 11 | 4.011 | 3.010 |
| 3 1/2 | .065 | 16 | 2.385 | 3.370 |
| 3 1/2 | .120 | 11 | 4.332 | 3.260 |
| 4 | .065 | 16 | 2.732 | 3.870 |
| 4 | .083 | 14 | 3.472 | 3.834 |
| 4 | .120 | 11 | 4.973 | 3.760 |
| 5 | .120 | 11 | 6.254 | 4.760 |
| 6 | .120 | 11 | 7.536 | 5.760 |
316 stainless steel square tubing sizes chart
| OUTSIDE DIMENSION IN INCHES | WALL THICKNESS DECIMAL | WALL THICKNESS GAUGE | WEIGHT PER FT. IN LBS. |
|---|---|---|---|
| 1 | .0490 | 18 | .630 |
| 1 | .0650 | 16 | .827 |
| 1 | .1200 | 11 | 1.436 |
| 1 1/4 | .0650 | 16 | 1.050 |
| 1 1/4 | .0830 | 14 | 1.317 |
| 1 1/4 | .1200 | 11 | 1.844 |
| 1 1/2 | .0650 | 16 | 1.270 |
| 1 1/2 | .0830 | 14 | 1.610 |
| 1 1/2 | .1200 | 11 | 2.255 |
| 1 1/2 | .1800 | 7 | 3.630 |
| 1 3/4 | .0830 | 14 | 1.880 |
| 2 | .0650 | 16 | 1.710 |
| 2 | .0830 | 14 | 2.164 |
| 2 | .1200 | 11 | 3.068 |
| 2 | .1800 | 7 | 4.455 |
| 2 | .1880 | 3/16 | 4.460 |
| 2 | .2500 | 1/4 | 6.010 |
| 2 1/2 | .1800 | 7 | 5.680 |
| 3 | .0830 | 14 | 3.293 |
| 3 | .1200 | 11 | 4.700 |
| 3 | .1800 | 7 | 6.903 |
| 3 | .1880 | 3/16 | 6.900 |
| 3 | .2500 | 1/4 | 10.000 |
| 4 | .1200 | 11 | 6.260 |
| 4 | .1800 | 7 | 9.270 |
| 4 | .1880 | 3/16 | 9.270 |
| 4 | .2500 | 1/4 | 12.680 |
| 6 | .2500 | 1/4 | 18.770 |
| 8 | .3750 | 3/8 | 38.890 |
1.4401 tube application
- Umbilicals
- Heat exchangers
- High Performance Liquid Chromatography (HPLC)
- Condensers
- Control lines
- Semiconductors
- Medical implants (including Pins, screws and implants)
- Process engineering
Seamless 316 stainless steel tubing tolerance
| Outer Dia | Wall Tolerance | Outer Dia Tolerance |
|---|---|---|
| .500”–1.500” excl | ± 10% | ± .005” |
| ≤ .500” | ± 10% | ± .005” |
| 1.500”–3.500” excl | ± 10% | ± .010” |
| 3.500”–5.500” excl | ± 10% | ± .015” |
Difference between mill finish & 316 polished stainless tubing
- The mill finish 316 Stainless Steel Round Tube can have dull to mirror like finish, depending on the surface treatment grade. A polished tube has a very smooth and glossy surface, perfect for aesthetic applications.
- Milled 316 Stainless Steel Square Tubing is more affordable than polished tubes.
- Mill finish can be achieved by passing the 316 metal through a rolling pin or extrusion die. They are generally used in industries like food processing, construction, etc. The SS 316 Electropolished Tubing solutions have enhanced corrosion resistance properties and thus, are used in various aggressive environments in nuclear and offshore industries. For optimal performance of polished 316 Stainless Steel Square Tubing, they should be maintained and cleaned properly.
What is smooth bore seamless 316 stainless steel tubing
The Smooth Bore 316 Seamless Tubing is used for medical purposes and is the best quality corrugated circuit available. They come with a smooth interior, enhanced flexibility and strength than standard SS316 Tubes.
Difference between ASTM A554 TP316 square & rectangular tubes
The primary difference between ASTM A554 TP316 Square Tube and rectangular tube is their cross-section. The square tubes are primarily used in construction, shipbuilding, steel structural engineering, etc., because they are stronger. The 316 Stainless Steel Rectangular Tubes is used for fluid transportation.
Advantages of using stainless steel 316 tubes in dairy industry
The 316 Stainless Steel Tubing suppliers recommend Stainless Steel 316 Tubes in Dairy Industry as:
- It is Chemically, bacteriologically, and organoleptically neutral to food products.
- It can be cleaned easily, which means maintaining its hygiene and appearance is easy.
- It is durable and resistant to corrosion and aging. Unlike other austenitic grades, they do not experience severe pitting when exposed to salty environments.