SA 268 TP 410 Boiler Tubes and SS 410 Seamless Tubes manufacturer in India
What is SA 268 TP 410 Boiler Tubes?
The SA 268 TP 410 Boiler Tubes are made from a base martensitic grade stainless steel which is often used as engineering steel. The SA 268 TP 410 Boiler Tubes material is like most of the martensitic alloys, and they can be hardened or tempered using the heating procedures. The ASTM A268 TP410 Heat Exchanger Tubes are primarily used for applications where good hardness is a necessary requirement. The material possesses good magnetic properties, and it is able to retain its properties even in annealed or heat treated conditions.
410 Stainless Steel Tube
Contact directly a SA 268 TP 410 Boiler Tubes manufacturer in India for lowest price and fast delivery
Thus, the Stainless Steel 410 Condenser Tube is used for applications that require magnetism.
ASTM A268 TP410 material and 410 Stainless Steel Heater Tubes exporter in Gujarat in square, coiled and round shapes
The SS 410 Seamless Tube is stronger than the welded ones. It is because, in seamless tubes, there are no weak welded seams like that of the SA268 TP410 Welded Tube. And the seams are where the liquid is prone to leakage. Also, the seamless Type 410 Heater Tubes can resist corrosion better.
They are capable of withstanding higher pressure and temperatures than the 410 SS ERW Tube. This is one of the reasons why seamless tubes are more expensive than welded ones. They are preferred for more critical applications, like the transfer of liquid, in the construction industry, etc.
Supplier of ASTM A268 TP410 Heat Exchanger Tubes and SA268 TP410 Welded Tube, check 410 SS ERW Tube pressure rating & price per kg in India
What is Stainless Steel 410 Condenser Tube?
The Stainless Steel 410 Condenser Tube is specifically designed for efficiently condensing process fluid off of the tube’s outer side. The application of these WNR 1.4006 Bright Annealed Tubes is widespread in heat exchangers. They are an eminent part of the condenser and evaporator refrigeration cycle inside a chiller.
This AISI 410 Cold Drawn Seamless Tube is also present in the condensing system inside a surface condenser. The UNS S41000 Polish Tube for a condenser can be found in various thermal and nuclear power stations. They are also used in various chemical processing plants.
WNR 1.4006 Bright Annealed Tubes and 410 Stainless Steel Tubing manufacturer in Gujarat, UNS S41000 Polish Tube available in cut lengths
High strength, hardness, & wear resistance are hallmarks of 410 stainless steel, martensitic stainless steel. This grade of stainless steel has an average chromium value of 11.5-13.5 percent and a carbon level of just 0.08%. Among other possible elements in the 410 Stainless steel are nickel, molybdenum, or sulfur.
Standard tolerances for 410 stainless steel tubes include outer diameter (+/- 0.005 inch), wall thickness (+/- 10% or +/- 0.010 inch), and length (+/- 1/16 inch), although the tolerance for 410 stainless steel tubing may vary based on the application.
Regarding its chemical composition, 410 stainless steel tubes typically consist of chromium, carbon, manganese, silicon, phosphorus, sulfur, nickel, and molybdenum.
