• An ISO 9001 and ISO 14001 Certified Company
Tubotech Stainless Inc

410 Stainless Steel Tube

410 Stainless Steel Tube

Is 410 Stainless Steel Seamless Tube Stronger than Welded?

As compared between seamless tubes and welded tubes, 410 stainless steel seamless tubes are stronger than welded tubes. Seamless tubes are made by forcing the steel through a die and thereby obtaining a product with no seams that is less likely to contain defects. This type of construction affords more desirable physical properties on the average than do internally welded seams, tensile strength and resistance to internal pressure being enhanced.

Welded 410 stainless steel tubes are made from welded strip and therefore have a possibility of a weak point at the weld when under stress or pressure. Seamless tubes are comparatively expensive and have assume strength compared to welded one although it can reduce the cost still they may not be preferred in the condition where high pressure or high structural features are needed. Therefore, seamless tubes are more commonly used in applications where there are high standards of safety essential like in heat exchangers boilers, and pressure vessels.

What is Stainless Steel 410 Condenser Tube?

The Stainless Steel 410 condenser tube is produced with a martensitic stainless steel that is quite strong or rigid and offers very good resistance to corrosion and hardness. It is also known to possess good mechanical properties due to the presence of a fairly high carbon content than the austenitic grades 304 or 316 for example; then again this grade may just be more susceptible to corrosion as well as other chemical attacks as compared to the austenitic grades of stainless steels. Offering performance in applications exposed to high pressure, these tubes are best performing in the conditions that are less corrosive than alloys.

Table of Contents


Specification of 410 stainless steel tube

SS 410 Seamless Tube Manufacturer in India With MTC

410 Stainless Steel Tube Specifications

410 stainless steel tube specification

 

 

 

ASTM A213 TP410 heat exchanger tubes size

ASTM A213 TP410 heat exchanger tubes size

  • 1/8″NB TO 30″NB IN
SA 213 TP 410 boiler tubes wall thickness

SA 213 TP 410 boiler tubes wall thickness

  • 0.5-25mm

 

 

SS 410 seamless tubes outside diameter

SS 410 seamless tubes outside diameter

  • 6-203mm
WNR 1.4006 seamless tubes standard

WNR 1.4006 seamless tubes standard

  • ASTM /ASME SA213/A249/A269

 

 

SA213 TP410 welded tube form

SA213 TP410 welded tube form  

  • Round
  • Square
  • Rectangular
  • Hydraulic
UNS S41000 polish tubing types

UNS S41000 polish tubing types

  • Seamless
  • Fabricated
  • ERW
  • Welded
  • LSAW tubes

 

 

Stainless steel 410 condenser tube packaging 

Stainless steel 410 condenser tube packaging 

  • Wooden crates
  • Shrink-wrapped
  • Wooden boxes
  • Carton boxes
  • Wooden pallets
AISI 410 bright annealed tubes end 

AISI 410 bright annealed tubes end 

  • Plain end
  • Beveled end
  • Treaded

 

 

SUS 410 heater tubes testing 

SUS 410 heater tubes testing  

  • Micro test
  • Flattening test
  • Eddy current testing
  • Hydrostatic test
  • Ultra sonic test (UT)
  • Flaring test
  • Chemical analysis
410 SS ERW tube documentation 

410 SS ERW tube documentation 

  • Letter of gurantee
  • Fumigation certificates
  • Raw material test reports
  • Heat treatment charts
  • Material test certificates as per NACE MR0175, EN 10204 3.2, EN 10204 3.1,
  • Test certificates certifying NACE MR0103

 

 

INOX 410 seamless tube form

INOX 410 seamless tube form

  • Round
  • Square
  • Rectangular
  • Hydraulic Etc
410 Grade Stainless Steel Tube End

410 Grade Stainless Steel Tube End

  • Plain end
  • Beveled end
  • Treaded

Buy ASTM A213 TP410 Welded and ERW Tubing in Custom Shapes, Refer All Types

SS 410 Tubes Types

410 stainless steel heater tubes

410 stainless steel heater tubes

Stainless steel 410 seamless tubes

Stainless steel 410 seamless tubes

ASTM A213 TP410 heat exchanger tubes

ASTM A213 TP410 heat exchanger tubes

SA213 TP410 welded tubes

SA213 TP410 welded tubes

410 SS ERW tube

410 SS ERW tube

Stainless steel 410 condenser tube

Stainless steel 410 condenser tube

Type 410 bright tubes

Type 410 bright tubes

WNR 1.4006 bright annealed tubes

WNR 1.4006 bright annealed tubes

UNS S41000 polish tubes

UNS S41000 polish tubes

410 stainless steel material

410 stainless steel material

SS 410 seamless tubes

SS 410 seamless tubes

SA 213 TP 410 boiler tubes

SA 213 TP 410 boiler tubes

Supplier Of WNR 1.4006 Condenser and Boiler Tube in Custom Sizes, Refer Size Chart

SA213 TP410 Welded Tubes Sizes

410 Stainless Steel Tube

Outside Diameter Outside Diameter
inch mm
 1/2 12.7
4    101.6
1/4 6.35
 5/8 15.88
 3/8 9.53
1    25.4
1 1/2 38.1
 3/4 19.05
2    50.8
1 1/4 31.75
2 1/2 63.5
1 3/4 44.5
3 1/2 88.9
4 1/2 114.3
3    76.2
Supply UNS S41000 Superheater and Heat Exchanger Tube For Various Industrial Application

410 SS ERW Tubes Applications

  • Automotive
  • Oil and Gas
  • Pulp and Paper
  • Constructions
  • Pharmaceuticals
  • Refining
  • Instrumentation
  • Food Processing

UNS S41000 Boiler Tubes Equivalent

Grade Old British UNS No Euronorm Japanese JIS Swedish SS
BS En No Name
410 410S21 56A S41000 1.4006 X12Cr13 SUS 410 2302

Chemical Composition of SS 410 Seamless Tubes

410 Stainless Steel

P 0.040%

S 0.030%

Mn 1.0%

Si 1.00%

Cr 13.5%

C 0.15%

Ni 0.75%

WNR 1.4006 Heater Tubes Physical Properties

Grade Elastic Modulus (GPa) Density (kg/m3) Mean Coefficient of Thermal Expansion (m/m/0C) Specific Heat 0-1000C (J/kg.K) Thermal Conductivity (W/m.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 200 7750 9.9 11.4 11.6 460 24.9 28.7 570

Mechanical Properties of Stainless Steel 410 Seamless Tubes

Grade Elongation (% in 50mm) min Yield Strength 0.2% Proof (MPa) min Tensile Strength (MPa) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 16 275 480 95 201

410 Stainless Steel Tube Pressure Ratings

Pipe Size
(inches)		 Pipe Schedule Temperature (°F)
750 100 650 200 600 300 500 400 700
10" 40 578 974 596 840 615 755 945 694 584
1" 40 1810 3048 1867 2629 1924 2362 2019 2171 1824
2" 40 1129 1902 1165 1640 1201 1474 1260 1355 1141
8" 40 637 1073 657 926 678 832 711 765 644
1.5" 40 1340 2257 1383 1947 1425 1750 1496 1608 1354
4" 40 909 1531 938 1321 967 1187 1014 1091 919
3" 40 1072 1806 1106 1558 1140 1400 1196 1287 1084
6" 40 724 1219 747 1052 770 945 808 869 732
5" 40 797 1342 822 1158 847 1040 889 956 805
Get Selection of Stainless Steel 410 Coiled and Capillary Tube At Best Price, Refer Tolerance Chart

ASTM A213 TP410 Heat Exchanger Tubes Tolerance

OD in mm Tolerance in mm
4 to 35 +/- 0.08
35 to 38 +/- 0.15
38 to 60 +/- 0.20
60 and above +/- 0.25

410 Stainless Steel Tube Price List

Price List Price in USD Price in UAE Dirham
410 Stainless Steel Tube Size: 6mm x 1m x 0.5mm US $ 1.50 UAE 5.51
SS 410 Tube Size: 12mm x 2m x 0.8mm US $ 3.20 UAE 11.75

ASTM A213 TP410 Welded Tube Weight Chart

Nominal size [inches] Wall thickness [inches] Outside diameter [inches] Weight [kg/m]
24 1,812 24,000 640,03
4 0,438 4,500 28,32
22 1,625 22,000 527,02
5 0,500 5,563 40,28
20 1,500 20,000 441,49
6 0,562 6,625 54,20
18 1,375 18,000 363,56
8 0,719 8,625 90,44
16 1,219 16,000 286,64
10 0,844 10,750 133,06
14 1,094 14,000 224,65
12 1,000 12,750 186,97

AISI 410 Round Tube Dimensions

Pipes Size
(in)		 Diameter
(in)
mm		 Transverse Areas
(in2)
mm2		 Nominal Thickness
(in)
mm		 Length of Pipe
(ft per sq. foot of surface)		 Weight Number of Threads per inch of Screw Volume
(ft3/ft)
External Internal External Internal Steel External Surface
(ft)		 Internal Surface
(ft)		 (lb/ft) (kg/m)
24 24.000 22.63 452.40 402.10 50.30 0.69 0.16 0.17 171.00 254.48 8 2.7930
1/8 0.405 0.27 0.13 0.06 0.07 0.07 9.43 14.20 0.24 0.36 27 0.0004
3/8 0.675 0.49 0.36 0.19 0.17 0.09 5.66 7.75 0.57 0.84 18 0.0013
¼ 0.540 0.36 0.23 0.10 0.13 0.09 7.07 10.49 0.42 0.63 18 0.0007
4 4.500 4.03 15.90 12.73 3.17 0.24 0.85 0.95 10.79 16.06 8 0.0884
½ 0.840 0.62 0.55 0.30 0.25 0.11 4.55 6.14 0.85 1.26 14 0.0021
16 16.000 15.00 201.05 176.70 24.35 0.50 0.24 0.25 78.00 116.08 8 1.2230
¾ 1.050 0.82 0.87 0.53 0.33 0.11 3.64 4.64 1.13 1.68 14 0.0037
12 12.750 11.94 127.64 111.90 15.74 0.41 0.30 0.32 53.60 79.77 8 0.7763
1 ½ 1.900 1.61 2.84 2.04 0.80 0.15 2.01 2.37 2.72 4.04 11 ½ 0.0141
5 5.563 5.05 24.30 20.00 4.30 0.26 0.69 0.76 14.61 21.74 8 0.1389
14 14.000 13.13 153.94 135.30 18.64 0.44 0.27 0.28 63.00 93.75 8 0.9354
2 2.375 2.07 4.43 3.36 1.08 0.15 1.61 1.85 3.65 5.43 11 ½ 0.0233
18 18.000 16.88 254.85 224.00 30.85 0.56 0.21 0.23 105.00 156.26 8 1.5550
2 ½ 2.875 2.47 6.49 4.79 1.70 0.20 1.33 1.55 5.79 8.62 8 0.0333
10 10.750 10.02 90.76 78.85 11.90 0.37 0.36 0.38 40.48 60.24 8 0.5476
3 3.500 3.07 9.62 7.39 2.23 0.22 1.09 1.25 7.58 11.27 8 0.0513
20 20.000 18.81 314.15 278.00 36.15 0.59 0.19 0.20 123.00 183.05 8 1.9260
3 ½ 4.000 3.55 12.56 9.89 2.68 0.23 0.95 1.08 9.11 13.56 8 0.0687
8 8.625 7.98 58.42 50.02 8.40 0.32 0.44 0.48 28.55 42.49 8 0.3552
6 6.625 6.07 34.47 28.89 5.58 0.28 0.58 0.63 18.97 28.23 8 0.2006

ASTM A213 TP410 Schedule Chart

NB Sizes Sch 5 Sch 160 Sch 10 Sch 80 Sch 40
1″ √ √ √ √ √
6″ √ √ √ √
1/8″ √ √ √ √
2 1/2″ √ √ √ √ √
4″ √ √ √ √ √
3/4″ √ √ √ √ √
1/2″ √ √ √ √ √
3″ √ √ √ √ √
1 1/2″ √ √ √ √ √
5″ √ √ √ √
1/4″ √ √ √ √
3/8″ √ √ √ √
2″ √ √ √ √ √

410 Stainless Steel Tube Corrosion Properties

  • Resistant to Mild Corrosion
  • Not Ideal for Acidic Environments
  • Moderate Corrosion Resistance
  • Susceptibility to Pitting
  • Improved Corrosion Resistance with Heat Treatment
  • Formability
  • Oxidation Resistance
  • Weldability

Heat Treatment of DIN 1.4006 Square Tube

Heat Treatment Process Temperature Range
Tempering 150°C to 650°C
Annealing 760°C to 820°C
Stress Relieving 200°C to 300°C
Hardening 820°C to 880°C
Solution Annealing 1050°C to 1100°C

Wall Thickness of SUS 410 ERW Tube

Tube Size Wall Thickness Outer Diameter (OD)
6 mm x 1 mm 1 mm 6 mm
400 mm x 50 mm 50 mm 400 mm
10 mm x 1 mm 1 mm 10 mm
300 mm x 40 mm 40 mm 300 mm
20 mm x 2 mm 2 mm 20 mm
200 mm x 20 mm 20 mm 200 mm
25 mm x 3 mm 3 mm 25 mm
150 mm x 15 mm 15 mm 150 mm
50 mm x 5 mm 5 mm 50 mm
100 mm x 10 mm 10 mm 100 mm
60 mm x 5 mm 5 mm 60 mm

410 Stainless Steel Tube Destination and Delivery Timeline

Changes in Price
Extra 5 %
Export to Shipping Time in Days
Indonesia  7
Vietnam  14
Croatia 60
South Korea  7
Slovenia 60
Sri Lanka  5
Bangladesh  14
Malta  60
Maldives  7
Singapore  8
Mayanmar  25
Japan  7
Malaysia  7
Taiwan  15
Thailand  7

Suppliers on the above list are ex-stock, Having previously supplied to Ghana, Kenya, Bahrain, Kuwait, and other countries.