• An ISO 9001 and ISO 14001 Certified Company
Tubotech Stainless Inc

ASTM B163 tube

ASME SB 163 tube

What is SB-163 Tube Material?

SB-163 material is a nickel alloy mainly used for nuclear and related applications. The ASME SB 163 Tube can withstand elevated temperature levels and the standard shows superior quality. Due to its chemical composition, the material has high creep strength and various other superior mechanical properties.

The SB 163 Tube material is widely used in the construction of various tubes that are highly durable and can be used in extreme environments. Cold working on the alloy SB 163 N06690 material can improve the surface of the tubes and exhibit better dimensional stability. They are available in different grades like Nickel 200, Nickel 201, Monel, Inconel and Incoloy. The min yield and tensile strengths along with other mechanical properties will depend on the specific SB-163 grade.

ASTM B163 vs SB 163 Seamless Tubing

The ASTM B163 and SB 163 Seamless Tubing are specifications for the same material. The ASTM B163 Alloy 690 Tubing creates the material specification and standard test methods for determining compliance.

The ASME SB 163 Welded Tubes specification selects those ASTM materials that show adequate performance in boilers or pressure vessel services. The SB 163 Seamless Tubes have high strength & tolerances as they are made from a single material piece. These tubes have a high service life and increased reliability.

Table of Contents


Specification of ASME SB 163 tube

ASME SB 163 UNS N02200 Seamless Tubes Manufacturer in India

Specifications of ASME SB 163 Tube

ASME SB 163 tube specification

 

 

 

ASME SB 163 heater tube size

ASME SB 163 heater tube size

  • 1/2" OD - 12" OD
SB 163 tube material outer diameter

SB 163 tube material outer diameter

  • 3.00 - 219.10 mm

 

 

ASTM B163 heater tubes length

ASTM B163 heater tubes length

  • Within 13500 millimetre
ASME SB 163 UNS N02200 seamless tubes thickness 

ASME SB 163 UNS N02200 seamless tubes thickness 

  • 0.40 - 12.70 mm

 

 

ASME SB 163 heat exchanger tubes type

ASME SB 163 heat exchanger tubes type  

  • Welded
  • CDW
  • ERW
  • DOM
  • Seamless
  • Fabricated
  • CEW
  • LSAW
SB 163 seamless tubes Swg & Bwg

SB 163 seamless tubes Swg & Bwg

  • 10 Swg.
  • 12 Swg.
  • 14 Swg.
  • 16 Swg.
  • 18 Swg.
  • 20 Swg

 

 

ASME SB 163 UNS N02201 tubing end 

ASME SB 163 UNS N02201 tubing end 

  • Screwed
  • Beveled
  • Threaded
  • Plain
ASME SB 163 welded tubes surface finish 

ASME SB 163 welded tubes surface finish 

  • 2B
  • No.1
  • No.4
  • No.8
  • Mirror finish 

 

 

ASME SB 163 heat exchanger tubes delivery condition

ASME SB 163 heat exchanger tubes delivery condition  

  • Annealed & Pickled
  • Polished
  • Bright & Annealed, etc
ASTM B163 seamless condenser tubes technique

ASTM B163 seamless condenser tubes technique

  • Cold drawn
  • Cold rolled
  • Hot rolled
  • Extrusion tube

 

 

SB 163 UNS N02200 tubing value added services

SB 163 UNS N02200 tubing value added services

  • Polishing (Electro & Commercial)
  • Beveling
  • Cutting
  • Threading
  • Destructive and non destructive
  • Draw & expansion as per required
  • Annealed & pickled bending
  • Ultrasonic testing
ASTM B163 heater tubes processing service

ASTM B163 heater tubes processing service

  • Punching
  • Welding
  • Bending
  • Decoiling
  • Moulding
  • Cutting

Most Trusted Supplier Of ASTM B163 UNS N02201 Heat Exchanger Tubes in Finned, Bent and Straight Design

ASTM B 163 Tubing Types

SB 163 N06690 material

SB 163 N06690 material

ASTM B163 seamless condenser tubes

ASTM B163 seamless condenser tubes

ASME SB 163 heat exchanger tubes

ASME SB 163 heat exchanger tubes

ASTM B163 heater tubes

ASTM B163 heater tubes

ASME SB 163 welded tubes

ASME SB 163 welded tubes

SB 163 seamless tubes

SB 163 seamless tubes

ASTM B163 alloy 690 seamless tubing

ASTM B163 alloy 690 seamless tubing

SB 163 tube material

SB 163 tube material

Get Cut to Size ASME SB 163 Seamless Nickel Tube at Fair Price, Check Size Chart

Sizes of SB 163 Tube Material

O.D. Standard Wire Gauge (SWG)
22 20 18 16 14
(0.711mm) (0.914mm) (1.218mm) (1.625mm) (2.032mm)
in mm Wght, kg/m (average wall1)
1 1/4" 1.250 31.750 0.553 0.706 0.931 1.23 1.51
1 1/2" 1.500 38.100 0.666 0.851 1.13 1.48 1.84
2" 2.000 50.800 0.892 1.14 1.51 2.00 2.48
2" 2.000 50.800 0.892 1.14 1.51 2.00 2.48
1/4" 0.250 6.350 - 0.124 0.157 0.192 -
3/8" 0.375 9.525 - 0.197 0.253 0.321 0.381
1/2" 0.500 12.700 0.213 0.270 0.350 0.451 0.543
3/4" 0.750 19.050 - 0.415 0.544 0.709 0.866
1" 1.000 25.400 0.440 0.560 0.738 0.967 1.19
2 1/2" 2.500 63.500 - - 1.90 2.52 3.13
3" 3.000 76.200 - - 2.29 3.03 3.77

ASME SB 163 UNS N02200 Material Physical Properties

Density
Grade Metric Imperial
Incoloy 800 / 800H 7.94 gm/cm3 0.287 lb/in3
Monel 400 8.8 gm/cm3 0.318 lb/in3
Incoloy 825 8.14 gm/cm3 0.294 lb/in3
Nickel 200 UNS N02200/ Nickel Alloy UNS N02201 8.89 gm/cm3 0.321 lb/in3

Equivalent of ASTM B163 Seamless Condenser Tubes

- North America German United Kingdom Japan France Russia Europe
GRADES UNS DIN No BS JIS AFNOR GOST EN
Incoloy 800 N08800 1.4876 NA 15 NCF 800 Z8NC32-21 ЭИ670 X10NiCrAlTi32-20
Monel 400 N04400 2.4360 NA 13 NW 4400 NU-30M МНЖМц 28-2,5-1,5 NiCu30Fe
Incoloy 800H N08810 1.4958 / 1.4876 NA 15(H) NCF 800H Z8NC33-21 ЭИ670 X5NiCrAlTi31-20
Nickel Alloy 200 N02200 2.4066 NA 11 NW 2200 N-100M НП-2 Ni 99.2
Incoloy 825 N08825 2.4858 NA 16 NCF 825 NFE30C20DUM ЭП703 NiCr21Mo
Nickel Alloy 201 N02201 2.4068 NA 12 NW 2201 - НП-2 LC-Ni 99

ASME SB 163 Heat Exchanger Tubes Chemical Composition

Inconel 600

Ni 72.0%

Cu 0.5%

Fe 6.0 to 10.0%

C 0.15%

Mn 1%

S 0.015%

Si 0.5%

Nickel 200

Ni 99.0%

Cu 0.25%

Fe 0.40%

C 0.15%

Mn 0.35%

S 0.01%

Si 0.35%

Monel 400

Ni 63.0%

Cu 0.25%

Fe 2.5%

C 0.3%

Mn 2%

S 0.024%

Si 0.5%

Buy SB 163 N02200 Condenser Tube With Wall Thickness Ranging From 3.76  to 4.19 mm, Refer Thickness Chart

ASTM B163 Heater Tubes Thickness Chart

GAUGE TYPICAL VALUE (INCH) THICKNESS RANGE (INCH)
22 0.028 0.025 - 0.029
19 0.042 0.038 - 0.042
16 0.065 0.060 - 0.065
18 0.049 0.044 - 0.049
17 0.058 0.053 - 0.058
15 0.072 0.066 - 0.074
20 0.035 0.031 - 0.035
14 0.083 0.075 - 0.085
13 0.095 0.087 - 0.097
12 0.109 0.101 - 0.111
11 0.12 0.112 - 0.122
10 0.134 0.126 - 0.136
9 0.148 0.140 - 0.150
8 0.165 0.157 - 0.167
7 0.18 0.175 - 0.185

Gauge Chart of ASME SB 163 Welded Tubes

Size O.D in MM 12 Gauge (2.64) (0.104") 10 Gauge (3.25) (0.128") 14 Gauge (2.1) (0.083") 16 Gauge (1.65) (0.065") 20 Gauge (0.91) (0.0.35") 18 Gauge (1.21) (0.049") 22 Gauge (0.71) (0.028")
1/4" 6.35 0.070 0.075 0.065 0.058 0.037 0.046 0.030
5/16" 7.93 0.105 0.114 0.089 0.079 0.048 0.060 0.038
3/8" 9.52 0.135 0.152 0.113 0.097 0.058 0.080 0.046
1/2" 12.7 0.200 0.226 0.157 0.134 0.079 0.105 0.063
5/8" 15.87 0.264 0.310 0.212 0.174 0.103 0.134 0.081
3/4" 19.05 0.326 0.386 0.256 0.215 0.124 0.161 0.097
7/8" 22.25 0.390 0.465 0.310 0.252 0.145 0.192 0.113
1" 25.4 0.450 0.541 0.351 0.294 0.167 0.218 0.131
1 1/4" 31.750 0.580 0.696 0.448 0.375 0.200 0.275 0.162
1 1/2" 38.1 0.700 0.851 0.542 0.452 0.250 0.332 0.196
1 3/4" 44.45 0.832 1.020 0.646 0.530 0.294 0.390 0.230
2" 50.8 0.960 1.161 0.733 0.607 0.336 0.447 0.263
2 1/4" 57.15 1.085 1.315 0.828 0.687 – 0.504 –
2 1/2" 63.5 1.210 1.472 0.924 0.792 – 0.562 –
2 3/4" 69.85 1.338 1.630 1.022 0.847 – 0.619 –
3" 76.2 1.460 1.782 1.115 0.924 – 0.676 –
3 1/2" 88.9 1.718 2.092 1.306 1.082 – 0.791 –
4" 101.6 1.971 2.403 1.497 1.239 – 0.905 –
4 1/2" 114.3 2.224 2.713 1.608 1.397 – 1.020 –
5″ 127.0 2.477 3.023 1.879 1.554 – 1.134 –
5 1/2″ 139.7 2.730 3.336 2.070 1.713 - 1.250 -
6″ 152.4 2.983 3.654 2.261 1.875 – 1.364 –

SB 163 Seamless Tubes Mechanical Properties

Grade Condition UNS No. Tensile Strength minimum, ksi (MPa) Yield Strength(0.2% Offset),minimum, ksi (MPa) Rockwell Hardness(Or equivalent) for annealed ends Elongation in 2 inches or 50 milimeter(or 4D) minimum
Nickel 200(Nickel Alloy)
  • Annealed
  • Stress Relived
 UNS N02200
  • 55(379)
  • 65(448)
  • 15(103)
  • 40(276)
  • -
  • B65 max
  • 40
  • 15
Nickel 201
  • Annealed
  • Stress Relived
 UNS N02201
  • 50(345)
  • 60(414)
  • 12(83)
  • 30(207)
  • -
  • B62 max
  • 40
  • 15
Monel 400
  • Annealed
  • Stress Relived
 UNS N04400
  • 70(483)
  • 85(586)
  • 28(193)
  • 55(379)
  • -
  • B75 max
  • 35
  • 15
Inconel 600 Annealed UNS N06600 80(552) 35(241) - 30
Inconel 601 Annealed UNS N06601 80(552) 30(207) - 30
Incoloy 800
  • Annealed
  • Cold-Worked
 UNS N08800
  • 75(517)
  • 83(572)
  • 30(207)
  • 47(324)
  • -
  • -
  • 30
  • 30
Incoloy 800H Annealed UNS N08810 65(448) 25(172) - 30
Incoloy 800HT Annealed UNS N08811 65(448) 25(172) - 30
Incoloy 800HT Annealed UNS N08811 65(448) 25(172) - 30
Incoloy 825 Annealed UNS N08825 85(586) 35(241) - 30
Offer ASME SB 163 Tube With Mill TC For Condenser and Heat-exchanger Service , See Application

ASTM B163 UNS N02201 Tubing Application

ASTM B163 UNS N02201 Tubing Application

ASME SB163 Seamless Tubes Outer Diameter

NOMINAL PIPE SIZE OD SCH 80 SCH 5 SCH 40 SCH 10
1-1/4" 1.66 0.191 0.065 0.14 0.109
1/2" 0.84 0.147 0.065 0.109 0.083
4" 4.5 0.337 0.083 0.237 0.12
3" 3.5 0.3 0.083 0.216 0.12
3/4" 1.05 0.154 0.065 0.113 0.083
3-1/2" 4 0.318 0.083 0.226 0.12
1" 1.315 0.179 0.065 0.133 0.109
2" 2.375 0.218 0.083 0.154 0.109
1-1/2" 1.9 0.2 0.065 0.145 0.109
2-1/2" 2.875 0.276 0.083 0.203 0.12

ASTM B163 Tube Dimensions


TUBE O.D. WALL THICKNESS (INCHES)
TUBE GAUGE
TUBE I.D.
00 24 0 10 1 12 2 23 3 14 4 15 5 16 6 17 7 18 8 19 9 21 11 13 22 20
0.380 0.022 0.340 0.134 0.300 0.109 0.284 0.025 0.259 0.083 0.238 0.072 0.220 0.065 0.203 0.058 0.180 0.049 0.165 0.042 0.148 0.032 0.120 0.095 0.028 0.035
7/8" 0.115 0.831 0.195 0.607 0.275 0.657 0.307 0.825 0.357 0.709 0.399 0.731 0.435 0.745 0.469 0.759 0.515 0.777 0.545 0.791 0.579 0.811 0.635 0.685 0.819 0.805
4 1/2" 3.740 4.456 3.820 4.232 3.900 4.282 3.932 4.450 3.982 4.334 4.024 4.356 4.060 4.370 4.094 4.384 4.140 4.402 4.170 4.416 4.204 4.436 4.260 4.310 4.444 4.430
1" 0.240 0.956 0.320 0.732 0.400 0.782 0.432 0.950 0.482 0.834 0.524 0.856 0.560 0.870 0.594 0.884 0.640 0.902 0.670 0.916 0.704 0.936 0.760 0.810 0.944 0.930
1 1/8" 0.365 1.081 0.445 0.857 0.525 0.907 0.557 1.075 0.607 0.959 0.649 0.981 0.685 0.995 0.719 1.009 0.765 1.027 0.795 1.041 0.829 1.061 0.885 0.935 1.069 1.055
5 1/4" 4.490 5.206 4.570 4.982 4.650 5.032 4.682 5.200 4.732 5.084 4.774 5.106 4.810 5.120 4.844 5.134 4.890 5.152 4.920 5.166 4.954 5.186 5.010 5.060 5.194 5.180
4 1/4" 3.490 4.206 3.570 3.982 3.650 4.032 3.682 4.200 3.732 4.084 3.774 4.106 3.810 4.120 3.844 4.134 3.890 4.152 3.920 4.166 3.954 4.186 4.010 4.060 4.194 4.180
1 1/4" 0.490 1.206 0.570 0.982 0.650 1.032 0.682 1.200 0.732 1.084 0.774 1.106 0.810 1.120 0.844 1.134 0.890 1.152 0.920 1.166 0.954 1.186 1.010 1.060 1.194 1.180
4" 3.240 3.956 3.320 3.732 3.400 3.782 3.432 3.950 3.482 3.834 3.524 3.856 3.560 3.870 3.594 3.884 3.640 3.902 3.670 3.916 3.704 3.936 3.760 3.810 3.944 3.930
1 1/2" 0.740 1.456 0.820 1.232 0.900 1.282 0.932 1.450 0.982 1.334 1.024 1.356 1.060 1.370 1.094 1.384 1.140 1.402 1.170 1.416 1.204 1.436 1.260 1.310 1.444 1.430
3" 2.240 2.956 2.320 2.732 2.400 2.782 2.432 2.950 2.482 2.834 2.524 2.856 2.560 2.870 2.594 2.884 2.640 2.902 2.670 2.916 2.704 2.936 2.760 2.810 2.944 2.930
1 3/4" 0.990 1.706 1.070 1.482 1.150 1.532 1.182 1.700 1.232 1.584 1.274 1.606 1.310 1.620 1.344 1.634 1.390 1.652 1.420 1.666 1.454 1.686 1.510 1.560 1.694 1.680
3 1/2" 2.740 3.456 2.820 3.232 2.900 3.282 2.932 3.450 2.982 3.334 3.024 3.356 3.060 3.370 3.094 3.384 3.140 3.402 3.170 3.416 3.204 3.436 3.260 3.310 3.444 3.430
2" 1.240 1.956 1.320 1.732 1.400 1.782 1.432 1.950 1.482 1.834 1.524 1.856 1.560 1.870 1.594 1.884 1.640 1.902 1.670 1.916 1.704 1.936 1.760 1.810 1.944 1.930
3 3/4" 2.990 3.706 3.070 3.482 3.150 3.532 3.182 3.700 3.232 3.584 3.274 3.606 3.310 3.620 3.344 3.634 3.390 3.652 3.420 3.666 3.454 3.686 3.510 3.560 3.694 3.680
4 3/4" 3.990 4.706 4.070 4.482 4.150 4.532 4.182 4.700 4.232 4.584 4.274 4.606 4.310 4.620 4.344 4.634 4.390 4.652 4.420 4.666 4.454 4.686 4.510 4.560 4.694 4.680
2 1/4" 1.490 2.206 1.570 1.982 1.650 2.032 1.682 2.200 1.732 2.084 1.774 2.106 1.810 2.120 1.844 2.134 1.890 2.152 1.920 2.166 1.954 2.186 2.010 2.060 2.194 2.180
3 1/4" 2.490 3.206 2.570 2.982 2.650 3.032 2.682 3.200 2.732 3.084 2.774 3.106 2.810 3.120 2.844 3.134 2.890 3.152 2.920 3.166 2.954 3.186 3.010 3.060 3.194 3.180
2 1/2" 1.740 2.456 1.820 2.232 1.900 2.282 1.932 2.450 1.982 2.334 2.024 2.356 2.060 2.370 2.094 2.384 2.140 2.402 2.170 2.416 2.204 2.436 2.260 2.310 2.444 2.430
5" 4.240 4.956 4.320 4.732 4.400 4.782 4.432 4.950 4.482 4.834 4.524 4.856 4.560 4.870 4.594 4.884 4.640 4.902 4.670 4.916 4.704 4.936 4.760 4.810 4.944 4.930
2 3/4" 1.990 2.706 2.070 2.482 2.150 2.532 2.182 2.700 2.232 2.584 2.274 2.606 2.310 2.620 2.344 2.634 2.390 2.652 2.420 2.666 2.454 2.686 2.510 2.560 2.694 2.680

UNS N02201 Annealed Tube Pressure Rating

Tube Size O.D.
(IN.)		 .049 .028 .065 .035 .095 .083 .120 .109
3/8 4400   6100 3100        
1/8   7900   10100        
3/4 2200   3000   4600 4000    
1/4 7000 3700 9500 4800        
1/2 3200   4400 2300        
5/16 5400   7300 3700        
1     2200   3400 2900 4300 3900

Welding Techniques of ASTM B163 Tube

  • Laser Welding
  • Preheat and Post-Weld Heat Treatment
  • TIG (Tungsten Inert Gas) Welding
  • Argon Gas Shielding
  • MIG (Metal Inert Gas) Welding
  • Electron Beam Welding
  • Stick Welding
  • Flux-Cored Arc Welding

SB 163 N02201 Welded Tubes Heat Treatment

Heat Treatment Process Temperature Range
Annealing 1,000°C - 1,150°C
Stress Relieving 450°C - 650°C
Solution Annealing 1,050°C - 1,150°C
Tensile Stress Relief 650°C - 750°C
Hardening 1,150°C - 1,300°C

Estimated Shipping Period for ASTM B163 Tube

Changes in Price
Extra 5 %
Export to Shipping Time in Days
The Republic Of Congo 45-60
Cyprus 45
Trinidad And Tobago 60
Algeria 45
Panama 45
Angola 45
Puerto Rica 45
Sudan 30
Bahamas  60
Equatorial Guinea 45-60
Costa Rica 45
Gabon 45-60
Mexico 45
Canada 45
Jamaica 50