-
Email
-
Call
+91 98590 17777
ASTM B423 pipe
What is ASTM B423 Pipe?
The ASTM B423 is a standard specification for pipes containing chromium and nickel in its alloy. It also has iron, molybdenum and copper of less amounts in its chemical composition. They are available in the form of hot-finished or cold-worked ASME SB 423 nickel chromium pipe solutions and are intended for use in general corrosive applications.
They offer great resistance to most corrosive environments, including chloride-ion related stress corrosion cracking. It also shows good resistance to reducing environments, like the ones having sulphuric and phosphoric acids in them. Adding molybdenum to the chemical composition also increases the resistance of the tube against pitting and crevice corrosion. The ASTM B423 Pipe is used in applications like nuclear fuel reprocessing, acid production, chemical processing, radioactive waste handling, etc.
ASME SB 423 Seamless Tube manufacturer in India
SB 423 Tube delivery conditions
The ASTM B423 Seamless Tubing delivery condition is basically the state in which they are supplied to the customers. Adhering to specific conditions will ensure that the tube has acquired the specifications required for an application. Some of the common delivery conditions of the tubes are annealed & pickled, bright annealed, cold drawn & annealed, solution annealed, stress relieved, etc. Suppliers would first understand the requirements of the client and relevant industry standards to choose the right delivery condition for ASTM B423 nickel chromium tubes.
Searching for SB 423 tube supplier in Gujarat? Tubotech has a wide selection of ASTM B423 seamless tubing in various surface finish
ASTM B423 pipe
SB 423 tube
SB 423 material
What is ASME SB 423 Cold-Worked Pipe?
SB 423 Cold-Worked Pipe undergo a shaping process at ambient temperature, below their recrystallization temperature. The process involves using oil or water solutions for lubrication and cooling during the cold forming operation of SB 423 Material unheated pipes and tubes. This process is in contrast with various hot working techniques like hot rolling, welding, etc.
The cold worked pipes are in great demand due to their corrosion resistance properties. The material composition also helps it to show good resistance to different oxidizing agents, including nitric acids, nitrates, and oxidizing salts.
We supply small diameter SB 423 material and SB 423 Cold-worked Pipe in sizes ranging from 6.00 mm to 914.4 mm
Table of Contents
Specifications of ASTM B423 pipe
| Size | Thickness | End |
|---|---|---|
| 1/2''~48'' | SCH5~SCHXXS | Beveled End,Plain End |
| Melting point | Process | Length |
| 1370-1400℃ | Hot/Cold Rolled,Hot work,Cold drawn | 0-12M |
| Schedule | Thickness | Length |
| SCH5, SCH10, SCH40, STD, SCH80, SCH160 | 0.3mm – 50 mm | Within 13500mm |
Hydro & Eddy Current Tested ASTM B423 heat exchanger tube and ASME SB 423 superheater tube manufacturer in Gujarat
Types of SB 423 tube
ASTM B423 tube
ASTM B423 seamless tubing
ASME SB 423 nickel chromium pipes
ASTM B423 tubing
ASTM B423 nickel chromium tubes
SB 423 cold-worked pipe
ASTM B423 nickel chromium tubes stockist in India, check Hot Fin Annealed SB 423 tube pressure rating & dimensions
Chemical composition of SB 423 material
| Element | UNS N08825 | UNS N08221 |
| Nickel | 38.0-46.0 | 39.0-46.0 |
| Chromium | 19.5-23.5 | 20.0-22.0 |
| Iron | 22.0min | 22.0min |
| Manganese | 1.0max | 1.0max |
| Carbon | 0.05max | 0.025max |
| Copper | 1.5-3.0 | 1.5-3.0 |
| Silicon | 0.5max | 0.5max |
| Sulfur | 0.03max | 0.03max |
| Aluminum | 0.2max | 0.2max |
| Titanium | 0.6-1.2 | 0.6-1.0 |
| Molybdenum | 2.5-3.5 | 5.0-6.5 |
ASTM B423 tube mechanical properties
| Alloy | Condition and Size | Yield Strength 0.2% Offset, min, ksi(MPa) | Tensile Strength, min, ksi(MPa) | Elongation in 2 in. or 50 min(4D), min, % |
| UNS N08825 | hot-finished annealde | 25(172) | 75(517) | 30 |
| UNS N08825 | cold-worked annealed | 35(241) | 85(586) | 30 |
| UNS N08825 | hot-forming quality(hot-finished or cold-drawn annealed) | A | A | A |
| UNS N08221 | cold-finished, annealed | 34(234) | 79(545) | 30 |
ASTM B423 seamless tubing tolerance
| Nominal Outside Diameter in.(mm) | Permissible Variations | |||||
| Outside Diameter, in.(mm) | Thickness of Specified Nominal Wall, % | Thickness of Specified Minimum Wall, % | ||||
| + | - | + | - | + | - | |
| Over 4 1/2(114) to 6 1/2(165), incl | 0.047(1.2) | 0.047(1.2) | 16.0 | 12.5 | 28.5 | 0 |
| 2 1/2(64) to 4 1/2(114), incl | 0.031(0.79) | 0.031(0.79) | 16.0 | 12.5 | 28.5 | 0 |
| Over 6 1/2(165) to 9 1/4(235), incl | 0.062(1.6) | 0.062(1.6) | 16.0 | 12.5 | 28.5 | 0 |
ASME SB 423 nickel chromium pipes equivalent
| UNS No | Euronorm | Old British | GOST | Japanese JIS | ||
| No | AFNOR | BS | En | |||
| N08825 | 2.4858 | NFE30C20DUM | NA 16 | NiCr21Mo | ЭП703 | NCF 825 |
Size chart of ASTM B423 tubing
| inch | Sch | WT milimeter | O.D. milimeter | Kilogram/m |
|---|---|---|---|---|
| 1/4 | 10S | 1.65 | 13.72 | 0.50 |
| 1/4 | 40S | 2.24 | 13.72 | 0.64 |
| 1/4 | 80S | 3.02 | 13.72 | 0.81 |
| 3/8 | 10S | 1.65 | 17.15 | 0.64 |
| 3/8 | 40S | 2.31 | 17.15 | 0.86 |
| 3/8 | 80S | 3.20 | 17.15 | 1.12 |
| 1/2 | 10S | 2.11 | 21.34 | 1.02 |
| 1/2 | 40S | 2.77 | 21.34 | 1.29 |
| 1/2 | 80S | 3.73 | 21.34 | 1.65 |
| 3/4 | 10S | 2.11 | 26.67 | 1.30 |
| 3/4 | 40S | 2.87 | 26.67 | 1.71 |
| 2½ | 80S | 7.01 | 73.03 | 11.59 |
| 3 | 10S | 3.05 | 88.90 | 6.56 |
| 3 | 40S | 5.49 | 88.90 | 11.47 |
| 3 | 80S | 7.62 | 88.90 | 15.51 |
| 3 | 160 | 11.132) | 88.90 | 21.67 |
| 3½ | 10S | 3.05 | 101.60 | 7.53 |
| 3½ | 40S | 5.74 | 101.60 | 13.78 |
| 3½ | 80S | 8.08 | 101.60 | 18.92 |
| 4 | 10S | 3.05 | 114.30 | 8.50 |
| 4 | 40S | 6.02 | 114.30 | 16.32 |
| 4 | 80S | 8.56 | 114.30 | 22.67 |
| 4 | 160 | 13.492) | 114.30 | 34.05 |
| 5 | 40S | 6.55 | 141.30 | 22.10 |
| 5 | 80S | 9.53 | 141.30 | 31.44 |
| 5 | 160 | 15.882) | 141.30 | 49.87 |
| 6 | 10S | 3.4 | 168.28 | 14.04 |
| 6 | 40S | 7.11 | 168.28 | 28.69 |
| 3/4 | 80S | 3.91 | 26.67 | 2.23 |
| 1 | 10S | 2.77 | 33.40 | 2.13 |
| 1 | 40S | 3.38 | 33.40 | 2.54 |
| 1 | 80S | 4.55 | 33.40 | 3.29 |
| 1 | 160 | 6.352) | 33.40 | 4.30 |
| 1¼ | 10S | 2.77 | 42.16 | 2.73 |
| 1¼ | 40S | 3.56 | 42.16 | 3.44 |
| 1¼ | 80S | 4.85 | 42.16 | 4.53 |
| 1¼ | 160 | 6.352) | 42.16 | 5.69 |
| 1½ | 10S | 2.77 | 48.26 | 3.16 |
| 1½ | 40S | 3.68 | 48.26 | 4.11 |
| 1½ | 80S | 5.08 | 48.26 | 5.49 |
| 2 | 10S | 2.77 | 60.33 | 3.99 |
| 2 | 40S | 3.91 | 60.33 | 5.52 |
| 2 | 80S | 5.54 | 60.33 | 7.60 |
| 2 | 160 | 8.742) | 60.33 | 11.29 |
| 2½ | 10S | 3.05 | 73.03 | 5.35 |
| 2½ | 40S | 5.16 | 73.03 | 8.77 |
| 6 | 80S | 10.97 | 168.28 | 43.21 |
| 6 | 120 | 14.27 | 168.28 | 54.75 |
| 6 | 160 | 18.262) | 168.28 | 68.59 |
| 8 | 40S | 8.18 | 219.08 | 43.20 |
| 8 | 80S | 12.7 | 219.08 | 65.63 |
| 8 | 120 | 18.23 | 219.08 | 91.30 |
| 8 | 160 | 23.012) | 219.08 | 112.97 |
ASTM B423 nickel chromium tubes application
- Marine Industries
- Heat Exchangers
- Acid production
- Oil and Gas
- Nuclear
- Gas Processing
- Aerospace Industries
- Chemical processing
- Petrochemicals
- Power Generation