• An ISO 9001 and ISO 14001 Certified Company

Incoloy 800H tube

ASTM B407 UNS N08811 seamless tube and nickel alloy 800HT coiled tubing supplier in India

Incoloy 800H tube

Manufacturer of Incoloy 800HT tube and alloy 800H condenser tube for heat exchangers & boilers

Incoloy 800H welded tube

Incoloy 800H welded tube

Incoloy 800HT boiler tube

Incoloy 800HT boiler tube

Incoloy 800H seamless tube

Incoloy 800H seamless tube

Incoloy 800HT tube and ASME SB 407 N08810 material, we accept small quantities, check Incoloy 800H tubing price in India

Specification chart of Incoloy 800H tube

 

 

 

 

 

 

 

 

 

 

 

 

 

Incoloy 800H tube specification
Price of distributors are bit higher compared to Incoloy 800H seamless tube manufacturers, find wide range and specific dimensions

Incoloy 800HT tube types

Incoloy 800H welded tube

Incoloy 800H welded tube

Alloy 800H condenser tube

Alloy 800H condenser tube

ASTM b407 UNS N08811 seamless tube

ASTM b407 UNS N08811 seamless tube

ASME SB 407 N08810 material

ASME SB 407 N08810 material

DIN 1.4959 annealed tube

DIN 1.4959 annealed tube

Nickel 800HT heat exchanger tube

Nickel 800HT heat exchanger tube

Incoloy alloy 800H round tube

Incoloy alloy 800H round tube

Nickel alloy 800HT coiled tubing

Nickel alloy 800HT coiled tubing

Inconel 800H hydraulic tubing

Inconel 800H hydraulic tubing

Refre technical data of Incoloy 800H welded tube, Nickel 800HT heat exchanger tubes and DIN 1.4959 round tubing

ASTM B407 UNS N08811 seamless tubes equivalent

STANDARD UNS WERKSTOFF NR. JIS OR BS AFNOR GOST EN
Incoloy 800H N08810 1.4958 / 1.4876 NCF 800H XH32T NA 15(H) Z8NC33-21 ЭИ670 X5NiCrAlTi31-20
Incoloy 800HT N08811 1.4859 / 1.4876 NCF 800HT XH32T NA 15(HT) ЭИ670 X8NiCrAlTi32-21

Chemical composition of Incoloy 800H welded tubes

Element Alloy 800HT Alloy 800H
Mn 1.50 maximum 1.50 maximum
C 0.06 – 0.10 0.05 – 0.10
Si 1.00 maximum 1.00 maximum
Cu 0.75 maximum 0.75 maximum
S 0.015 maximum 0.015 maximum
Fe 39.50 minimum 39.50 minimum
Cr 19.00 – 23.00 19.00 – 23.00
Ni 30.00 – 35.00 30.00 – 35.00

Mechanical properties of Alloy 800H condenser tubes

Element Alloy 800H/800HT
Melting Point 1385 °C (2525 °F)
Density 7.94 g/cm3
Tensile Strength Psi – 75,000 , MPa – 520
Yield Strength (0.2%Offset) Psi – 30,000 , MPa – 205
Elongation 30 %

ASTM B407 UNS N08811 seamless tubes standards

  • ASTM B 163
  • ASME SB 163
  • ASME SB 514/SB 775
  • DIN 17459
  • ASTM B 407/B 829
  • ISO 6207
  • ASTM B 515/B 751
  • BS 3074NA15
  • ASTM B 514/B 775
  • SEW 470
  • VdTÜV 412 & 434
  • ASME Code Case 1325 and 1983
  • ASME SB 515/SB 751
  • ASME SB 407/SB 829

ASME SB 407 N08810 material testing

  • Pitting Resistance Test
  • Chemical Analysis – Spectro Analysis
  • Hardness Test
  • Mechanical Testing Such as Tensile of Area
  • Flaring Test
  • Flattening Test
  • Positive Material Identification – PMI Testing
  • Micro and MacroTest
  • Intergranular Corrosion (IGC) Test

Weight chart of DIN 1.4959 tubes

DIMENSIONS WEIGHT PER DIMENSIONS WALL WALL WEIGHT PER
(MILIMETER) METRE (KG) (MILIMETER) (MILIMETER) (MILIMETER) METRE (KG)
12.07 x 12.07 0.044 40 x40 1.020 1.020 1.049
0.055 1.050 1.050 1.085
15 x 15 0.053 1.020 2.000 2.045
0.065 1.050 3.000 3.075
20 x 20 0.071 50 x50 1.020 1.050 2.032
0.088 1.050 2.000 3.008
1.019 2.000 3.000 4.065
25 x 25 0.092 60 x60 1.020 2.000 3.071
1.014 1.050 3.000 5.049
1.049 70 x70 2.000 3.000 6.053
2.020 80 x80 3.000 2.000 4.098
30 x 30 1.010 1.020 3.000 7.053
1.037 100 x 100 1.050 2.000 6.040
1.084 2.000 3.000 9.053
2.072 3.000

Nickel 800HT heat exchanger tubes tolerance

OUTSIDE DIAMETER IN. WALL THICKNESS IN. OUTSIDE DIAMETER +/- IN.
2-1/2" - 3-1/2"incl. 0.0032 - 0.0165 0.0014
Over 0.0165 - 0.0220 0.0020
1 - 1-1/2"incl. 0.0025 - 0.0065 0.0008
Over 0.0065 - 0.0134 0.0010
3-1/2" - 5"incl. 0.0083 - 0.0165 0.0020
Over 0.0165 - 0.0220 0.0025
2" - 2-1/2"incl. 0.0032 - 0.0065 0.0012
Over 0.0065 - 0.0109 0.0013
Over 0.0109 - 0.0165 0.0014
1/2" - 1"incl. 0.0025 - 0.0065 0.0005
Over 0.0065 - 0.0134 0.0010
1-1/2" - 2"incl. 0.0025 - 0.0049 0.0010
Over 0.0049 - 0.0083 0.0011
Over 0.0083 - 0.0148 0.0012

Incoloy alloy 800H round tubes sizes

Pipe WT milimeter Sch inch OD milimeter Kg/m
3.091 80S 3/4 26.067 2.023
2.077 10S 1 33.040 2.013
3.038 40S 1 33.040 2.054
4.055 80S 1 33.040 3.029
6.0352) 160 1 33.040 4.030
2.077 10S 42.016 2.073
3.056 40S 42.016 3.044
4.085 80S 42.016 4.053
6.0352) 160 42.016 5.069
2.077 10S 48.026 3.016
1.065 10S 1/4 13.072 0.050
2.024 40S 1/4 13.072 0.064
3.002 80S 1/4 13.072 0.081
1.065 10S 3/8 17.015 0.064
2.031 40S 3/8 17.015 0.086
3.020 80S 3/8 17.015 1.012
2.011 10S 1/2 21.034 1.002
2.077 40S 1/2 21.034 1.029
3.073 80S 1/2 21.034 1.065
2.011 10S 3/4 26.067 1.030
2.087 40S 3/4 26.067 1.071
3.068 40S 48.026 4.011
5.008 80S 48.026 5.049
2.077 10S 2 60.033 3.099
3.091 40S 2 60.033 5.052
5.054 80S 2 60.033 7.060
8.0742) 160 2 60.033 11.029
3.005 10S 73.003 5.035
5.016 40S 73.003 8.077
7.001 80S 73.003 11.059
3.005 10S 3 88.090 6.056
5.049 40S 3 88.090 11.047
7.062 80S 3 88.090 15.051
11.0132) 160 3 88.090 21.067
3.005 10S 101.060 7.053
5.074 40S 101.060 13.078
8.008 80S 101.060 18.092
3.005 10S 4 114.030 8.050
6.002 40S 4 114.030 16.032
8.056 80S 4 114.030 22.067
13.0492) 160 4 114.030 34.005
6.055 40S 5 141.030 22.010
9.053 80S 5 141.030 31.044
15.0882) 160 5 141.030 49.087
3.04 10S 6 168.028 14.004
7.011 40S 6 168.028 28.069
10.097 80S 6 168.028 43.021
14.027 120 6 168.028 54.075
18.0262) 160 6 168.028 68.059
8.018 40S 8 219.008 43.020
12.07 80S 8 219.008 65.063
18.023 120 8 219.008 91.030
23.0012) 160 8 219.008 112.097

Pressure rating of Nickel alloy 800HT coiled tubing

Incoloy 800 Pipe O.D. (in.) Wall Thickness of Incoloy 800H tube (inches)
0.028 0.035 0.083 0.049 0.065 0.095 0.109 0.120
Working Pressure (psig)
3/8 3100 4400 6100
1/2 2300 3200 4400
1/8 7900 10100
1/4 3700 4800 7000 9500
5/16 3700 5400 7300
3/4 4000 2200 3000 4600
1 2900 2200 3400 3900 4300