ASTM B165 UNS N04400 material and Monel 400 Seamless Tube supplier in India
What is Monel 400 Tube?
The Monel 400 Tube material is an alloy of nickel and copper, and it can effectively resist seawater corrosion, acids, and several other corrosive media. The Alloy 400 Tubing shows good corrosion resistance, and they are found in various marine applications. The ASTM B165 UNS N04400 material is also used for making various equipment in the chemical plants, boiler feeders, crude oil distillation towers, and heat exchangers In other words, the ASME SB 165 N04400 Hydraulic Tubing shows good performance in a wide range of corrosive media. They can only be hardened by cold working and exhibit good weldability and high strength.
Monel 400 Tube
If you purchase directly from Monel 400 Tube manufacturers you can save 10-12% cost
Seamless Cold Finished Alloy 400 Tubing manufacturer in India, check ASME SB 165 N04400 Hydraulic Tubing price in Gujarat
How do you calculate torsional stiffness of a Monel 400 Seamless Tube?
The torsional stiffness or the ratio of torque to the angular twist of the Monel 400 Seamless Tube can be calculated by the given equation:
Torsional stiffness = T / θ
We have the torsional equation, which is- T / θ = GJ ∕ L
Where,
G is the rigidity modulus
J is the polar moment of inertia
L is the shaft’s total length
The torsional stiffness equation of DIN 2.4360 Heat Exchanger Tube is= T / θ = GJ ∕ L
What are Monel 400 Tubing hot rolled, cold drawn & annealed?
The hot rolled Monel Alloy 400 High Pressure Tubing is when the material is rolled above its recrystallization temperature. This helps to increase the malleability and formability of the material, along with its durability.
The Monel 2.4360 Cold Drawn Seamless Tubing is manufactured by drawing the material at room temperature. It offers uniform tolerances, along with enhanced machinability, strength, and tolerances than the hot rolled products.
To manufacture the Nickel 400 Annealed Tube, heat treatment is applied to the material so as to remove its internal stress and increase its ductility. It softens the tube better than the cold working procedure.
Supplier of Monel 400 Seamless Tube and DIN 2.4360 Heat Exchanger Tube, buy cut to sizes material at genuine price
Creep and creep-rupture behavior of Alloy 400 Tubing
The creep of Monel Alloy 400 Superheater Tubing is the time-dependent deformation which takes places at a constant pressure and elevated temperature condition.
The creep rupture property of the Monel 400 Welded Tube can be obtained by applying a constant pressure at a given temperature.
Exporter of Nickel 400 Annealed Tube and Monel Alloy 400 High Pressure Tubing in Asia, check Monel 400 Welded Tube size range and stock in Gujarat
Is alloy 400 tubings corrosion-resistant? What are the properties of alloy 400 tubes?
Alloy 400 tubes have been highly regarded for their higher corrosion resistance level in marine and terrestrial settings. It is a nickel-copper alloy with a 67 percent nickel to 23 percent copper ratio and a small fraction of other metals like manganese, iron, carbon, & silicon.
Tubes made from alloy 400 are particularly useful in high-pressure situations because of their tolerance to stress rust breaking. They are also robust to several forms of corrosion, such as sea water, sulfuric or hydrofluoric acid, & alkaline solutions.
Alloy 400 tubing is resistant to corrosion, but it also possesses a variety of other crucial aspects. It is simple to weld and manufacture and possesses excellent mechanical qualities at atmospheric and extreme temperatures. It also has excellent resistance to crevice and pitting corrosion, two of the most common types of corrosion.
