• An ISO 9001 and ISO 14001 Certified Company
Tubotech Stainless Inc

ASTM A268 TP430 Tube

SA 268 TP 430 boiler tubes

What is SA 268 TP 430 Boiler Tubes?

The SA 268 TP 430 material is a martensitic stainless steel grade. The SA 268 TP 430 Boiler Tubes are mainly used for applications that require better mechanical properties, like hardness, crevice and stress corrosion. They can be used for other specific applications in industries like petroleum, oil and gas, etc.

The SA268 TP430 Coil Tubing material is one of the most widely used hardenable ferritic stainless steel. It has around 16% chromium in its composition, which enhances its corrosion resistance properties. They also show good heat and oxidation resistance. It retains good mechanical properties up to the temperature of 816 °C.

What are Welded, ERW and 430 Stainless Steel Seamless Tube?

The ASTM A268 TP430 Welded Tubes are produced by roll forming the strips of given material into the shape of a tube. The welding process can be accomplished by both hot forming and cold forming. The cold forming procedure results in 430 Stainless Steel Tubing to have tighter tolerances and a smoother finish.

ERW pipes are produced by cold formation of the SA268 TP430 tubes. round cylindrical in shape having weld lines along the length of the cylinder. The SS 430 Seamless Tube comes without any welding seam. They are basically solid metal tubes that are connected to other tubes without any welding joints.

The UNS S43000 Cold Drawn Seamless Tubes has threads for forming a network of tubes. They are the most expensive amongst the three due to mechanical properties, complexity of manufacturing and quantity of 430 ss raw material.

Table of Contents


Specification of SA 268 TP 430 boiler tubes

430 Stainless Steel Welded and Seamless Tubing Manufacturer in India

SA 268 TP 430 Boiler Tubes Specifications

SA 268 TP 430 boiler tubes specification

 

 

 

430 Stainless steel tubing outside diameter

430 Stainless steel tubing outside diameter

  • 6-203 mm
SA268 TP430 coil tubing wall thickness

SA268 TP430 coil tubing wall thickness

  • 0.5-25mm

 

 

Type 430 bright annealed tubes technique

Type 430 bright annealed tubes technique

  • Seamless/ Welded
WNR 1.4016 heat exchanger tubes standard

WNR 1.4016 heat exchanger tubes standard

  • ASTM A268, ASME SA268

 

 

SS 430 seamless tube length

SS 430 seamless tube length  

  • Up to 25m
430 SS condenser tube cut length

430 SS condenser tube cut length

  • Single random
  • Double random & Cut length.

 

 

UNS S43000 cold drawn seamless tube end

UNS S43000 cold drawn seamless tube end

  • Plain end
  • Beveled end
  • Treaded
AISI 430 tubes form 

AISI 430 tubes form 

  • Round
  • Square
  • Rectangular
  • Hydraulic Etc

 

 

WNR 1.4016 heat exchanger tubes application 

WNR 1.4016 heat exchanger tubes application 

  • Heat exchanger
  • Heater
  • Condenser
  • Machining
  • Bearing machining
ASTM A268 TP430 welded tube delivery condition

ASTM A268 TP430 welded tube delivery condition

  • Pickled
  • Polished
  • Bright annealed

Purchase SA 268 TP 430 Boiler Tubes in Standard or Custom Range of Sizes at Best Price

Size Chart of 430 Stainless Steel Tube

Square Tube Rectangle Tube
Size(mm) Wall Thickness (mm) Size(mm) Wall Thickness (mm)
70*70 75*7580*80 90*90100*100 1.5-5.75 60*80 50*80 100*40 120*80 1.5-5.75
20*2025*2530*30 1.2-3.0 20*40 30*40 1.2-3.0
40*40 50*50 1.2-4.75 30*50 25*50 30*60 40*60 1.2-4.75
120*120 140*140 150*150 2.5-10.0 160*80 100*150140*80 100*180200*100 2.5-10.0
250*250 300*300350*350 4.5-15.75 250*200 300*200 350*200 350*250450*250 400*300 500*200 4.5-15.75
160*160 180*180200*200 3.5-12.0 200*150 250*150 3.5-12.0
280*280400*400 5.0-20.0 400*350 400*250500*250 500*300400*600 5.0-20.0

Shop Online UNS S43000 Ferritic Stainless Steel Tubing in Various Forms and Shape

430 Stainless Steel Tubing Types

ASTM A268 TP430 welded tube

ASTM A268 TP430 welded tube

SA268 TP430 coil tubing

SA268 TP430 coil tubing

430 SS condenser tube

430 SS condenser tube

Stainless steel 430 heater tubes

Stainless steel 430 heater tubes

Type 430 bright annealed tubes

Type 430 bright annealed tubes

WNR 1.4016 heat exchanger tubes

WNR 1.4016 heat exchanger tubes

UNS S43000 cold drawn seamless tube

UNS S43000 cold drawn seamless tube

AISI 430 round tubes

AISI 430 round tubes

430 Stainless steel bright tube

430 Stainless steel bright tube

SA 268 TP 430 seamless boiler tubes

SA 268 TP 430 seamless boiler tubes

430 Stainless steel welded tubing

430 Stainless steel welded tubing

SS 430 bright annealed tubes

SS 430 bright annealed tubes

SS 430 Seamless Tube Chemical Composition

SS 430

P 0.04%

S 0.030%

C 0.12%

Mn 1%
Si 1%

Cr 16 18%

Ni 0.50%

Mechanical Properties of ASTM A268 TP430 Welded Tubes

rade Tensile Strength (MPa) min Elongation (% in 50mm) min Yield Strength 0.2% Proof (MPa) min Hardness
Rockwell B (HR B) max Brinell (HB) max
430 483 22 310 85 183

Physical Properties of SA268 TP430 Coil Tubing

Grade Mean Co-eff of Thermal Expansion (μm/m/°C) Density (g/cm3) Elastic Modulus (GPa) Electrical Resistivity (μΩ.m) Thermal Conductivity (W/m.K) Specific Heat (J/Kg.K)
SS 430 0-100°C 0-315°C 0-538°C at 100°C at 500°C 0-100°C
10.4 11 11.4 7.8 200 600 26.1 26.3 460

Equivalent Grades of 430 SS Condenser Tubes

GRADE UNS SWEDISH SS OLD BRITISH JAPANESE JIS EURONORM
BS EN NO NAME
SS 430 S43000 2320 430S17 60 SUS 430 1.4016 X8Cr17

Stainless Steel 430 Heater Tubes Application

  • Kitchen Utensils
  • Refrigerator Cabinet Panels
  • Industrial Pipe and Tube
  • Lashing Wire
  • Automotive Trim
  • Element Supports
  • Linings for Dish Washers
  • Chimney Liners
  • Stove Trim Rings
  • Fasteners
As Supplier Quickly Offer  WNR 1.4016 Martensitic Stainless Steel Tubing With Tension and Hardness Test in Mumbai

ASME SA 268 TP 430 Boiler Tubes Testing

ASME SA 268 TP 430 Boiler Tubes Testing
Stockist Of High Quality ASTM A268 Grade 430 tube For High Temperature Service, Refer Tolerances

ASTM A268 TP430 Stainless Steel Tubing Sizes Tolerance

OD Tolerance, In.[Mm] OD, In.[Mm] Wall Thickness, % Thin Wall Tubes
±0.005 [0.13] Up To1⁄2, [12.7], Excl ±15
±0.030 [0.76] 51⁄2 To 8 [139.7 To 203.2], Incl ±10 Less Than 0.150 In. [3.8 Mm] Nominal
±0.005 [0.13] 1⁄2 To 11⁄2 [12.7 To 38.1], Excl/Td> ±10< Less Than 0.065 In. [1.6 Mm] Nominal
±0.015 [0.38] 31⁄2 To 51⁄2 [88.9 To 139.7], Excl ±10 Less Than 0.150 In. [3.8 Mm] Nominal
±0.010 [0.25] 11⁄2 To 31⁄2 [38.1 To 88.9], Excl ±10 Less Than 0.095 In. [2.4 Mm] Nominal

ASTM A268 TP430 Tube Heat Treatment

Heat Treatment
Solution Annealing 900°C to 1050°C (1652°F to 1922°F)
Annealing 800°C to 850°C (1472°F to 1562°F)
Tempering 450°C to 650°C (842°F to 1202°F)
Hardening 1000°C to 1100°C (1832°F to 2012°F)

ASME SA 268 TP 430 Boiler Tubes Certification

  • 3.1 Certification
  • ISO Certification
  • FDA Certified
  • PED Certification
  • ASME

ASTM A268 TP430 Tube Price List

Product Description Price in USD Price in UAE Dirham
ASTM A268 TP430 Stainless Steel Tube Size: 6 mm x 0.5 mm US $ 2.00 UAE 3.70 - 7.40
S A268 TP430 Stainless Steel Tube Size: 12 mm x 1.0 mm US $ 5.00 UAE 12.90 - 18.50

WNR 1.4016 Welded Tube Corrosion Resistance characteristics

  • General Corrosion
  • Stress Corrosion Cracking
  • Pitting
  • Intergranular Corrosion
  • Heat and Oxidation Resistance
  • Crevice Corrosion

Dimensions of ASME SA 268 TP 430 Seamless Tube

Tube Size (OD x Wall Thickness) Outside Diameter (OD) [mm] Wall Thickness (WT) [mm]
1/4" x 0.035" 6.35 0.89
1" x 0.065" 25.4 1.65
3/8" x 0.035" 9.53 0.89
3/4" x 0.065" 19.05 1.65
1/2" x 0.035" 12.7 0.89
1-1/4" x 0.065" 31.75 1.65
1/2" x 0.065" 12.7 1.65
2" x 0.065" 50.8 1.65
1-1/2" x 0.065" 38.1 1.65

ASTM A268 TP430 Tube Weight Chart

Inside Diameter (ID) [mm] Weight per meter (kg/m) Weight per foot (kg/ft)
34.8 2.61 0.796
4.57 0.31 0.094
9.4 0.86 0.263
7.75 0.48 0.146
16.75 1.30 0.396
10.92 0.65 0.198
28.4 2.17 0.662
22.1 1.73 0.528
47.2 3.48 1.061

UNS S43000 Ferritic SS Tubing Thickness Chart

Nominal Size (Inches) Wall Thickness (WT) [mm] Wall Thickness (WT) [mm]
1" 0.065 0.095
1/4" 0.035 0.065
4" 0.065 0.095
1/2" 0.065 0.095
1-1/4" 0.065 0.095
3/8" 0.035 0.065
3/4" 0.065 0.095
1/2" 0.035 0.065
2" 0.065 0.095
1-1/2" 0.065 0.095
3" 0.065 0.095
2-1/2" 0.065 0.095

HS Code of 430 Stainless Steel Welded Tube

HS CODe 7304113000

SA 268 TP 430 Boiler Tube Estimated Time and Delivery Location

Changes in Price
Extra 5 %
Export to Shipping Time in Days
Libya 45-60
Thailand 7
Sweden 45
Russia 20
Nigeria 30
Cambodia 9
Finland 45
Turkey 21
Egypt 18
Poland 45
Germany 20
Vietnam 10
Australia 21
Kazakhstan 45-60
Norway 45