-
Email
-
Call
+91 98590 17777
ASTM A789 UNS S32205 Tube
Benefits of UNS S32205 hot finish seamless tubes
UNS S32205 material, popularly known as Duplex 2205, is a stainless steel containing chromium, nickel, molybdenum, etc., in its chemical composition. The hot finished seamless UNS S32205 Tubes are used for applications that do not require precise dimensions and great surface quality. They are also used in services where finish and mechanical qualities can easily be obtained through the process of heat treatment or machining.
The hot finished A789 S32205 condenser tube can be used in various applications, particularly where heavy wall thickness is an essential requirement. They are found in different mechanical parts, and in industries like aircraft, construction, drilling equipment, automobiles, and so on. The hot finished tubes come with the following features:
- They have greater wall thickness compared to tubes manufactured by other methods.
- The hot finished SA 789 UNS S32205 Seamless Tube exhibits higher strength and mechanical properties.
- They are mainly used for heavy-duty applications with high pressure that requires strength.
- The Duplex UNS S32205 Heater Tubes have a uniform structure which helps to reduce machining time and the expenses associated with it.
- The production procedure helps to construct a cost-effective heavy wall tubing solution.
- They are available in a wide range of sizes and can be customized as per client requirements.
Hot Rolling vs Cold Drawn
The primary difference between Hot Rolling and Cold Drawn A789 UNS S32205 coil tubing are in the way they
are processed. For hot rolling, the A790 UNS S32205 material is rolled at a high temperature. Whereas for
cold drawing, the tubes are first hot rolled and then further processed in a cold reduction material.
The hot rolled SA 789 S32205 ERW tube comes with slightly rounded edges and corners, and they might also
have slight distortions. They have greater malleability, which means they can be given any shape. The hot
rolling procedure increases toughness and ductility of the tubes. They are cheaper and free from internal
stress.
The cold drawn SA789 S32205 Heat Exchanger Tubes can be used for precise applications and have aesthetic
surface finish. They are stronger and harder than hot rolled tubes which increases their resistance
against distortion.
Table of Contents
- Specification Chart of ASTM A789 UNS S32205 Tubes
- SA 789 UNS S32205 Seamless Tube Size
- ASME SA 789 UNS S32205 Tubes Types
- Tolerance Chart of A789 S32205 condenser tube
- Chemical Composition of ASTM A789 S32205 welded tube
- SA789 S32205 Heat Exchanger Tubes Mechanical Properties
- ASTM A789 Gr. UNS NO. S32205 Annealed Tubes Physical Properties
- Equivalent of ASTM A789 UNS S32205 U-Tubes
- ASTM A789 Gr. UNS S32205 Tube Testing
- Temperature Range of SA 789 UNS S32205 ERW Tube
- ASTM A789 UNS S32205 Tube Price List
- Weight Chart of ASME SA 789 UNS S32205 Seamless Tube
- ASTM A789 UNS S32205 Tube Corrosion Resitance
- Pressure Rating of A789 Gr. UNS NO. S32205 Welded Tubing
ASME SA 789 UNS S32205 Seamless Tube Manufacturer in India
Specification Chart of ASTM A789 UNS S32205 Tubes
ASTM A789 UNS S32205 tubing dimensions
- OD: 6.0 to 630mm
- welded tube size: 6- 24”
- seamless tube size: 1/2- 8”
ASME SA 789 S32205 tubes length
- 17-24 feet
- 5.8 meters (20 feet)
- maximum length : 25000mm
- 6 meters (21 feet)
- Cut to size
UNS S32205 seamless tube wall thickness
- Average wall thickness
- 0.5 – 20mm
- SA 789 S32205 material thin wall tubing
ASTM A789 Gr. UNS NO. S32205 tube manufacturing process
- hot finished
- cold finished
European standard
- EN 10217-7
- EN 10312
- EN 10296-2
- EN 10297-2
- EN 10216-5
SA 789 UNS S32205 tube manufacturing type
- welded tube
- seamless tube
- ERW tubing
ASTM A789 Gr. UNS NO. S32205 tubing wall thickness
- SCH 10
- Schedule 5S/ 5
- SCH 10S
- SCH 40S
- SCH 30
- SCH 20
- SCH 40
- SCH 120
- SCH 80S/80
- Standard (SCH STD)
- SCH 160
- Double Extra Strong (XSS)
- Ex-Standard (XS)
ASTM A789 Gr. UNS S32205 tubing finish
- Bright Annealed
- 2B
- Mirror
- BA polishing
- 180 grit polished
- 400 grit
- Annealed & Pickled (A&P)
- 600 grit
- Solution annealed
- No.4
- Matt finish
- 320 grit
- Cold Drawn
SA 789 S32205 tubing supporting documents
- material size & schedule as per the work order
- Labeling verification
- Origin of material
- Verify quantity
- Inspection reports
- QC
- EN 10204 type 3.1 MTC
Meet standards of ASTM A789 Gr. UNS S32205 tubes
- ASME B36.19
- EN 10217-7
- ASME B36.19M
- EN 10216 – 2
- NSF 61
- EN 10216 – 5
- DIN 17456
- EN 10088-2
- EN 10088-3
- DIN 17458
ASTM A789 S32205 bright annealed tube surface finish and treatments
- Pickled (As per ASTM A380)
- Cleaned
- Passivated
- Precleaned
ASTM A789 S32205 tubing types
- straight tubing
- U bend tube
ASME SA 789 S32205 tubing mechanical test
- Tension test
- Flange test (for SA 789 S32205 welded tube)
- Hardness test
- Reverse flattening test
- Flaring test (for A789 S32205 seamless tube)
- 100% PMI tested
SA 789 S32205 material application
- Sea water
- Heat Exchangers
- Boilers
- Superheaters
- Fluid and gas transport
- Chloride environments
A789 UNS S32205 round tube manufacturers
- Arcelor Mittal, Luxembourg (Europe)
- Tubecon, Pretoria (South Africa)
- Tata steel, India
- Tenaris, Luxembourg (Europe)
- Outokumpu, Finland (Europe)
A789 S32205 stainless steel tubing value added services
- Threading
- Cutting
- Beveling
- Polishing
Supplier Of Cut To Sizes ASTM A789 Gr. UNS NO. S32205 Welded Tubing in Mumbai
SA 789 UNS S32205 Seamless Tube Size
| WT milimeter | OD milimeter | Sch | inches | Kg/meter |
|---|---|---|---|---|
| 3.38 | 33.40 | 40S | 1 | 2.54 |
| 4.55 | 33.40 | 80S | 1 | 3.29 |
| 6.352) | 33.40 | 160 | 1 | 4.30 |
| 2.77 | 42.16 | 10S | 1¼ | 2.73 |
| 3.56 | 42.16 | 40S | 1¼ | 3.44 |
| 4.85 | 42.16 | 80S | 1¼ | 4.53 |
| 6.352) | 42.16 | 160 | 1¼ | 5.69 |
| 2.77 | 48.26 | 10S | 1½ | 3.16 |
| 3.68 | 48.26 | 40S | 1½ | 4.11 |
| 5.08 | 48.26 | 80S | 1½ | 5.49 |
| 2.77 | 60.33 | 10S | 2 | 3.99 |
| 3.91 | 60.33 | 40S | 2 | 5.52 |
| 5.54 | 60.33 | 80S | 2 | 7.60 |
| 8.742) | 60.33 | 160 | 2 | 11.29 |
| 3.05 | 73.03 | 10S | 2½ | 5.35 |
| 5.16 | 73.03 | 40S | 2½ | 8.77 |
| 7.01 | 73.03 | 80S | 2½ | 11.59 |
| 3.05 | 88.90 | 10S | 3 | 6.56 |
| 5.49 | 88.90 | 40S | 3 | 11.47 |
| 7.62 | 88.90 | 80S | 3 | 15.51 |
| 1.65 | 13.72 | 10S | 1/4 | 0.50 |
| 2.24 | 13.72 | 40S | 1/4 | 0.64 |
| 3.02 | 13.72 | 80S | 1/4 | 0.81 |
| 1.65 | 17.15 | 10S | 3/8 | 0.64 |
| 2.31 | 17.15 | 40S | 3/8 | 0.86 |
| 3.20 | 17.15 | 80S | 3/8 | 1.12 |
| 2.11 | 21.34 | 10S | 1/2 | 1.02 |
| 2.77 | 21.34 | 40S | 1/2 | 1.29 |
| 3.73 | 21.34 | 80S | 1/2 | 1.65 |
| 2.11 | 26.67 | 10S | 3/4 | 1.30 |
| 2.87 | 26.67 | 40S | 3/4 | 1.71 |
| 3.91 | 26.67 | 80S | 3/4 | 2.23 |
| 2.77 | 33.40 | 10S | 1 | 2.13 |
| 11.132) | 88.90 | 160 | 3 | 21.67 |
| 3.05 | 101.60 | 10S | 3½ | 7.53 |
| 5.74 | 101.60 | 40S | 3½ | 13.78 |
| 8.08 | 101.60 | 80S | 3½ | 18.92 |
| 3.05 | 114.30 | 10S | 4 | 8.50 |
| 6.02 | 114.30 | 40S | 4 | 16.32 |
| 8.56 | 114.30 | 80S | 4 | 22.67 |
| 13.492) | 114.30 | 160 | 4 | 34.05 |
| 6.55 | 141.30 | 40S | 5 | 22.10 |
| 9.53 | 141.30 | 80S | 5 | 31.44 |
| 15.882) | 141.30 | 160 | 5 | 49.87 |
| 3.4 | 168.28 | 10S | 6 | 14.04 |
| 7.11 | 168.28 | 40S | 6 | 28.69 |
| 10.97 | 168.28 | 80S | 6 | 43.21 |
| 14.27 | 168.28 | 120 | 6 | 54.75 |
| 18.262) | 168.28 | 160 | 6 | 68.59 |
| 8.18 | 219.08 | 40S | 8 | 43.20 |
| 12.7 | 219.08 | 80S | 8 | 65.63 |
| 18.23 | 219.08 | 120 | 8 | 91.30 |
| 23.012) | 219.08 | 160 | 8 | 112.97 |
Buy ASTM A789 S32205 Ferritic and Austenitic Stainless Steel Tubing in Various Shapes, Refer All Types
ASME SA 789 UNS S32205 Tubes Types
A789 UNS S32205 coil tubing
SA 789 UNS S32205 seamless tube
SA 789 S32205 ERW tube
ASTM A789 S32205 welded tube
SA789 S32205 heat exchanger tubes
ASTM A789 UNS S32205 bright annealed tubes
ASTM A789 UNS S32205 U-tubes
A789 S32205 duplex steel tubes
SA789 S32205 cold drawn seamless tube
UNS S32205 ERW tubes
Duplex UNS S32205 heater tubes
A789 S32205 condenser tube
Supply ASME SA 789 S32205 Tubes For General Service With Heat-Treated Condition , See Tolerance
Tolerance Chart of A789 S32205 condenser tube
| NPS Designator | Permissible Variations in Outside Dia | |
|---|---|---|
| Over Inch | Under Inch | |
| Over 1-1/2 to 4, incl | 1/32 (0.031) | 1/32 (0.031) |
| 1/8 to 1-1/2, incl | 1/64 (0.015) | 1/32 (0.031) |
| Over 8 to 18, incl | 3/23 (0.093) | 1/32 (0.031) |
| Over 4 to 8, incl | 1/16 (0.062) | 1/32 (0.031) |
Chemical Composition of ASTM A789 S32205 welded tube
UNS S32205
SA789 S32205 Heat Exchanger Tubes Mechanical Properties
| Grade | Tensile Strength (MPa) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (MPa) min | Hardness | |
| Rockwell C (HR C) | Brinell (HB) | ||||
| UNS S32205 | 621 | 25 | 448 | 31 max | 293 max |
ASTM A789 Gr. UNS NO. S32205 Annealed Tubes Physical Properties
| Grade | Mean Co-eff of Thermal Expansion (μm/m/°C) | Density (kilogram/m3) | Specific Heat 0 to 100°C ( J/kg.K) | Electrical Resistivity (nΩ.m) | Elastic Modulus (GPa) | Thermal Conductivity (W/m.K) | |||
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C | |||||
| UNS S32205 | 13.7 | 14.2 | - | 782 | 418 | 850 | 190 | 19 | - |
Equivalent of ASTM A789 UNS S32205 U-Tubes
| UNS No | Euronorm | Old British | Japanese JIS | Swedish SS | ||
| No | Name | BS | En | |||
| S32205 | 1.4462 | X2CrNiMoN22-5-3 | 318S13 | - | SUS 329J3L | 2377 |
Get ASTM A789M Material Tested With Nondestructive Electric Test or the Hydrostatic Test.
ASTM A789 Gr. UNS S32205 Tube Testing
- Flattening Test
- Micro and MacroTest
- Pitting Resistance Test
- Positive Material Identification – PMI Testing
- Intergranular Corrosion (IGC) Test
- Flaring Test
- Hardness Test
- Mechanical Testing Such as Tensile of Area
- Chemical Analysis – Spectro Analysis
Temperature Range of SA 789 UNS S32205 ERW Tube
| Temperature Range | -22 to 617°F | -30 to 325°C |
|---|
ASTM A789 UNS S32205 Tube Price List
| Price list | Price in USD | Price in UAE Dirham |
|---|---|---|
| SA 789 SEAMLESS TUBES | US $ 7.12 | UAE 26.14 |
Weight Chart of ASME SA 789 UNS S32205 Seamless Tube
| Dimensions | Wall | Dimensions | Weight per | Weight per | Wall |
|---|---|---|---|---|---|
| (mm) | (mm) | (mm) | metre (kg) | metre (kg) | (mm) |
| 25 * 25 | 1.20 | 60 *60 | 0.92 | 3.71 | 2.00 |
| 12.7 * 12.7 | 1.20 | 40 *40 | 0.44 | 1.49 | 1.20 |
| 15 * 15 | 1.20 | 40 *40 | 0.53 | 2.45 | 2.00 |
| 12.7 * 12.7 | 1.50 | 40 *40 | 0.55 | 1.85 | 1.50 |
| 20 * 20 | 1.20 | 50 *50 | 0.71 | 2.32 | 1.50 |
| 15 * 15 | 1.50 | 40 *40 | 0.65 | 3.75 | 3.00 |
| 25 * 25 | 1.50 | 60 *60 | 1.14 | 5.49 | 3.00 |
| 20 * 20 | 1.50 | 50 *50 | 0.88 | 3.08 | 2.00 |
| 30 * 30 | 1.20 | 80 *80 | 1.10 | 7.53 | 3.00 |
| 20 * 20 | 2.00 | 50 *50 | 1.19 | 4.65 | 3.00 |
| 25 * 25 | 2.00 | 70 *70 | 1.49 | 6.53 | 3.00 |
| 30 * 30 | 2.00 | 100 * 100 | 1.84 | 9.53 | 3.00 |
| 25 * 25 | 3.00 | 80 *80 | 2.20 | 4.98 | 2.00 |
| 30 * 30 | 1.50 | 100 * 100 | 1.37 | 6.40 | 2.00 |
ASTM A789 UNS S32205 Tube Corrosion Resitance
| Corrosion Resitance | |
| Pitting Resistance | 35 to 40 |
| General Corrosion Resistance | 300°C (572°F) |
Pressure Rating of A789 Gr. UNS NO. S32205 Welded Tubing
| Tube O.D. (In.) |
Wall Thickness Of Tube (Inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| Working Pressure (Psig) | ||||||||
| .028 | .120 | .035 | .109 | .095 | .049 | .083 | .065 | |
| 1/8 | 7900 | 10100 | ||||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 3/4 | 4600 | 2200 | 4000 | 3000 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 1 | 4300 | 3900 | 3400 | 2900 | 2200 | |||
| 3/8 | 3100 | 4400 | 6100 | |||||
ASTM A789 UNS S32205 Tube Esitmated Delivery Time and Address
| Changes in Price Extra 5 % |
|
|---|---|
| Export to | Shipping Time in Days |
| Japan | 7 |
| The Republic Of Congo | 45-60 |
| Yemen | 21 |
| Jordan | 21 |
| Equatorial Guinea | 45-60 |
| Norway | 45 |
| Angola | 45 |
| Cyprus | 45 |
| Sudan | 30 |
| Algeria | 45 |
| Canada | 45 |
| Gabon | 45-60 |
| Panama | 45 |
| Mexico | 45 |
| Costa Rica | 45 |